Random good picture Not show

31. We study two areas of the electro - machining: the magnetic force electrolysis polishing and the dry - type WEDM.

32. Deuterium heavy water electrolysis is one of the most important generating deuterium methods.

33. To high energy consumption of zinc electrolysis process(ZEP), the energy consumption optimization problem is discussed.

34. Magnesium tank saver - provides anodic protection against corrosion of the tank due to electrolysis.

35. Some of the molten salt "electrolysis, " such as chloride, lead and silver chloride.

36. In the process of copper electrolysis by the traditional method, good stating sheet product is a major premise and basis for producing copper cathode of high quality.

37. The influence of polyethylene glycol on the aluminum hydroxide product in the process of ion-exchange membrane electrolysis was studied.

38. This paper introduces the application of the process for mercury removal by lodine complex absorption and electrolysis at Sheogan smelter and measures to solve existing problems at present.

39. Factors of the structure of the cell, the anode materials and sustain of electrolysis on the current yield was discussed.

40. Electrolysis is also used to plate one metal on another.

41. The insulation of electrolytic cell is closely related to the safety of electrolysis operation.

42. At the same time,[http://sentencedict.com/electrolysis.html] the C/C composites electrolysis plank was tested in electrobath.

43. A homogeneous anion exchange membrane with selective permeability was been applied to gold electrolysis.

44. The influence of temperature on the anodic process of seawater electrolysis are discussed.

45. By means of the low temperature electrolysis with organic electrolyte and the radioassay method, the Ce content in various phases of steel, cast iron and aluminum was measured.

46. Catalyzed iron internal electrolysis - zeolite bed - BAC was used to treat severely eutrophic water.

47. The thesis develops "The System of Activity Cost Accounting and Control of the Aluminum Electrolysis Enterprises" based on the theoretical analysis.

48. Anodic voltage - drop of prebaked anode aluminum electrolysis cell was around seized of 10 % of cell voltage.

49. So far we have only demonstrated that the mean charge in electrolysis is quantized.

50. The back EMF and I - V curves were measured in laboratory electrolysis cells.

51. Putting some TiO2 into aluminum electrolyzer can make aluminum ingot produced by electrolysis containing low content titanium.

52. The general slag produced in treating the anode sludge of copper electrolysis in a copper smelter has a high tellurium content and test is made on recovering the tellurium from the slag by leaching.

53. The battery has charged with load before leaving the factory , without free electrolysis, it allowed to be placed breadthways and transported by sea and railways nonhazardous material.

54. Electrolysis breaks water down.

55. Sodium ferrate was prepared by electrolysis of ferreous as anode, brass wire as cathode, sodium hydroxide as solutions and ceramics diaphragm as diaphragm.

56. The grain refinement effect of titanium added by electrolysis is better than that of Al-Ti master alloy when the titanium content is similar.

57. Overvoltage of common carbon anode was much higher up to 0.4-0.6V in aluminium electrolysis. It was mainly caused by that the chemical reaction of carbon with oxygen proceedcd slowly.

58. Recovering nickel by electrolysis is the process that nickel is reduced on the cathode with insoluble anode in the electrolysis system.

59. Slurry electrolysis is a new technology of hydrometallurgy developed in recent years.

60. A voltammetric and control potential electrolysis investigation of the direct electro-oxidation decarboxylation of D-gluconate ion to D-arabinose on spectroscopic graphite electrode is reported.