Random good picture Not show

121 This thesis is to employ the four-end parameter analysis of admittance power flow to study the vibration power flow in the slab and beam structure.

122 The vibration process of air spring is intervenient in two modified models through the research, and it represents strong nonlinear characteristics.

123 The most effective way for powerplant-mounting system to obtain excellent vibration isolation performance is to uncouple the multi-degree-of-freedom vibrations as much as possible.

124 According to the cycle formula of simple harmonic vibration, the cycle formula of simple pendulum could be figured out.

125 The eccentric shaft vibration exciter and partial block help to adjust amplitude.

126 This paper elucidates the factors and mechanism which result in vibration of the cold air channel system in detail.

127 The sensors used for the muzzle vibration responses include the eddy current type, laser CCD type,[www.Sentencedict.com] photoelectricity type and so on.

128 The reasons include inappropriate maintenance, component failures, filter blockage, bad crankshaft bearing shells, inappropriate fit clearances, abnormal diesel engine vibration and etc.

129 Finally, the torsion vibration nature frequency and torque amplitude factor of a rolling mill are calculated by using finite element method.

130 This paper analyzes the modal of Y7125 gear grinder spindle, gets out the main four stages of spindle vibration frequency and deals with the data.

131 To equip elastic suspension on a crawler dozer can effectively dampen vibration and shock in its travel mechanism.

132 Second, introduces the reason for the explosion of economizer, which mainly is erosion, abrasion and vibration.

133 In this paper, the vibration of composite materials orthotropic laminated plates have been analyzed by the Boundary Element Method.

134 Ultrasonic vibration technology was used to extract loosely sorbed phosphorus fraction in the sediments from Guanting Reservoir.

135 Useing the bimorph bend vibration mould, a simple and low cost electroacoustic doubler and mixer available for overall low frequency band can be produced.

136 The vibration responses of the need nodes were estimated according to the response of the finite nodes by the modal expansion technique.

137 Office equipments, such as printers, copiers, are prone to problems of paper jam, especially in high speed print or two side copy, there are also serious vibration and noise.

138 The appraisal result proved that, in the all kinds of aging treatment method about casts iron on engine bed, the vibration is the only green one.

139 Vibration alert for use in areas of high ambient noise.

140 In computer graphics, undesirable vibration of a display image on a display surface.

141 Also, the vibration control experiment is conducted with 4-order LQG discrete control model on test bed of adaptive truss.

142 Opera Art founder Sang Sang Jun vibration and enjoy the special allowance of the State Council.

143 The balloon is the rotational standing wave according to the string vibration theory.

144 Firstly, local-wave (LW) method is imported especially for solving questions about nonlinear and non-stationary of complex equipment surface vibration signals.

145 There was no vibration transmitted to the handles and the machine wasn't noisy either.

146 Therefore, effective isolation method is investigated by combining active and passive vibration isolation technology for out small disturbance.

147 Mechanical shock and vibration in real life is often happened thing, in technology and outdoor lamps and lanterns is common.

148 The vibration frequency and effective mass of strong- and weak-coupling bound polaron was derived by using improved linear combination operator and unitary transformation methods.

149 Finally, a bandwidth self-adaptive method for bit error ratio from satellite vibration is put out and a mathematics model is established.

150 The equivalent linearization method is used to analyze the nonlinear vibration of engineering equipments caused by certain gap between different parts as well as some preload inclination.