Random good picture Not show

91, This is an algorithm solidification simulation about"multiple nodal region"in boundary node of casting and mold system.

92, That's a three-legged ancient cooking vessel, which represents solidification between Han and Hui nationalities.

93, In this study, through the impurity distribution, organization and resistivity analysis, it evaluates the directional solidification purification effect on the polysilicon in the round.

94, Using self-feeding in solidification can make good surface quality, no shrinkage casting defects of castings; the technology product yield of the casting greatly increases.

95, The cast CAE technology based on solidification simulation of casting is a practical engineering technology.

96, Shrinkage cavity and shrinkage porosity were eliminated by adding iron chill on the valve body which make progressive solidification, together with atmospheric feeder which feed the casting.

97, The solidification process of liquid metal int he CASTEX technique was studied by FEM ( finite element method ).

98, Adopted proportional solidification theory and technique, which avoids the dispersed shrinkage of cylinder sleeve castings and achieves the well effect.

99, Calcium is important in the physiologic process of muscle or nervous reaction, nervous impulse transmission, heartbeat rhythm maintenance, blood solidification, cell coherence and so on.

100, The effects of temperature gradient and interfacial growth velocity on solid-liquid interface morphology were studied with succinonitrile under the unidirectional solidification system.

101, The solidification process of magnesium alloy AZ61 under magnetostatic field was researched, and the process without magnetic field was compared with it.

102, Have multiple non-vacuum and vacuum-melting equipment, mainly to the vacuum melting, directional solidification technology and the overall fine-grained technology.

103, The vacuum melting and argon protecting continuous unidirectional solidification technology was introduced(sentencedict.com), which combines vacuum inductive melting with continuous unidirectional solidification.

104, The solidification process of turntable in sand-faced iron mould was numerically studied, and the basic parameters of the process were obtained.

105, Directional solidification and single crystal will be the development direction of the casting microstructure simulation.

106, The theory of liquid metal die forging is the understanding of the process which combines solidification under high pressure with forced feeding by plastic deformation.

107, The main technological properties are linear expansivity, tensile strength, flowability and solidification time.

108, According to classical solidification theory and the mechanism of solidification microstructure under pulse current, the effect of super-cooling degree variation on nucleation rate was discussed.

109, Directional solidification technology is a technical course that use certain equipment to make directional structure material with excellent performance at determinate conditions.

110, The interface morphology plays an important role in microstructure during directional solidification, we can display the variety of the interface morphology using phase-field method.

111, An electric arc melting-directional solidification techniqueis presented by which the giant magnetostrictive materials of bi-directional crystalline are prepared .

112, Directional solidification technology is an effective method to prepare materials with single orientation structure and high mechanical properties.

113, Finally,(sentencedict.com) in the light of measured recalescence curves both the dependence of the fraction solid on time and the solidification rate on transient undercooling were determined.

114, A cellular automaton model was developed to simulate the primary spacing selection of dendritic array during directional solidification.

115, In this paper , the solidification structure of heat resisting alloy cast with dynamic action during centrifugal electroslag casting is studied , and the mechanism of dynamic action is investigated.

116, In accordance with proportional solidification principle and limited feeding method, a series of top riser size is recommended to heavy castings .

117, By making use of quenching and thermal-analysis technology, experiments showed that solidification process of CV-graphite cast iron during eutectic reaction can be divided into two stages.

118, Surplus sand that has not been embedded within the structure acts as a buttressing support while the solidification process takes place.

119, Microstructure analysis results showed that, in the condition of rapid solidification, the second phase morphology of monotectic alloys transited from rods into particles.

120, A kind of directional solidification equipment of high temperature gradient and double-zone heating is self-made.