Random good picture Not show

61. Combined with methanol's indirect use in power system, methanol and dimethyl-ether steam reforming use gas turbine exhaust gas to constitute the chemically recuperative gas turbine cycle.

62. This paper presents a method for creep life calculation of steam turbine parts.

63. A hydraulic turbine is the device which turns kinetic energy of water into circumrotation power energy, and makes dynamotor working, then transfer energy to other place.

64. This paper introduces a magnet - absorbing wall - climbing robot for efficiently maintaining turbine blades on site. The robot uses creep feed grinding to machine weld lines.

65. Presently, there are three familiar air supply apparatuses : air compressor, turbine pump and nutritional servo valve.

66. Who can tell me the principle of vacuum injector in the turbine?

67. However, a major advantage of superheating steam is that for increasing cycle temperature and pressure, the exhaust wetness in the turbine can be maintained within the physical limits.

68. The divided-flow two-level turbine engine with two pumps is composed of a turbine, a turbine shaft, a two-level booster pump wheel, a guide pulley and the expansion chamber shell.

69. To decrease the leakage of full closed wicket gate of reaction turbine is an important subject of improving the constructional characteristic of water turbine.

70. The control systems for wind turbine generators are compared and analyzed.

71. The results show that , the ratio of the output power of vaneless counter-rotating turbine can reduce 2.6% at the same turbine efficiency when the low pressure rotor curves positive.

72. Inner flow in Francis turbine is simulated by using DES model and a large amount of data at test points is exported. The result agrees well with the experiment.

73. Removing all the petroleum hydrocarbons, which includes turbine lube oil, air compressor lubricant and other compounds, is very difficult.

74. The paper introduces the structure and characteristic of soft cut-in wind turbine control system using a dual speed asynchronous generator.

75. The shaft of the turbine is coupled to the rotor of the generator.

76. Main equipment including: boiler, steam turbine, generator complete and their auxiliary equipments.

77. With the development of waterpower resources, the dimension of runner blade of Kaplan turbine is getting larger and larger.

78. This paper introduces an effective method suitable for wind farm central control which uses PLC as the wind turbine generators main control unit.

79. Self-sustained oscillation will appear in gas turbine combustor when unstable combustion couples with acoustic.

80. In this paper, the basic principle model theory of the impulse turbine is established.

81. Vacuum condenser is applicable to condensing exhaust steam from steam turbine.

82. Another ski area in the Northeast, the Jiminy Peak Mountain Resort in Massachusetts, has built a wind turbine to produce energy.

83. Because of particle size in high pressure fire-resistant oil of by-pass control system for stem turbine no. 3 Zhanjiang Power Polant exceeding standard, the by-pass valve can's be actuated.

84. Horizontal - axis turbines are the most common wind turbine design.

85. The transformation for No. 4 turbine in the Danjiangkou Hydropower Station also includes modification of fixed guide vane besides turbine.

86. The recuperator is one of the main components of the micro turbine in energy island system.

87. The film-cooling technique have already got usage of the long-term in the air gas turbine.

88. The computation results of rotor winding ventilation of a 125 MW air-cooled turbine generator with sub - slot had been provided.

89. Modem gas turbine rotors are usually formed as rod fastening rotor[sentencedict.com/turbine.html], in which disks are tied together by one central tie rod or several tie rods distributed in the circumference.

90. In passing through the turbine in the modern regenerative cycle, some of the steam is bled from the turbine at a series of three or four openings (more or less), for use in feedwater heaters.