Random good picture Not show

151. The torque ripple arosed by the slot effect in PM motor are more significant in the low speed hub motor for electric vehicle use.

152. The lathes are usually powered by electric motors which, through various gears, supply the necessary torque to the work material and provide the feed motion to the tool.

153. Special thanks to professor Meng to my calculation of the casting ladle shaft and maximum torque, check calculation.

154. The high ratio of torque per kilogram of active material seems to be very attractive.

155. The magnetic field of the earth creates a torque around the pivot.

156. In the evaluation of heat flow, the quantity of heat in each position of the torque tube has been determined using FEM (finite element method).

157. The linear speed-up phase in the starting process basically determines the starting time, and it can be accelerated by increase its starting torque to the maximum value.

158. Generally , ASR includes two components, namely , active brake control and engine torque control.

159. It also investigates the effect of secondary torque, the characteristics of moment redistribution subjected to reversed cyclic loading, and the role of spandrel beams in the overall response.

160. Small straight teeth casting ladle available high safety revolving shaft, a brake control vertical torque, doesn't exist kowtow phenomenon.

161. If they really wanted a 'stealth' helicopter they should have looked into creating something similar to the Comanche which has a covered fan that provides more torque while reducing noise.

162. The three major forces involved in valve actuation are thrust, torque and rimpull.

163. In this paper, a new idea about the analysis method of torque vector is introduced. Based on the analysis method, the step motor as an example is analysed for microstep driving technique.

164. ADVANTAGE - The torque for engine start-up is produced by raising the rotation speed of the motor generator prior to engine start, improving fuel consumption.

165. Based on one-dimensional flow theory, the dynamic characteristic of the tractor-brake hydraulic torque converter was analyzed.

166. It is discusses here, how to control the rotating torque of the magnetic brake, as the load on micromotor tested by microcomputer.

167. This engine applies the main shaft and countershaft whose module and intensity are increased. These improvement guarantee the reliability of the transmission and the output the torque.

168. Analysis of signal indicates that the sampled signal consists of torque signal and radial pulsation of machine tool spindle signal.

169. Applanation structure are used in torque motor to get a high output torque and low speed characteristic. The ratio between armature magnet core length and outside diameter just little.

170. There are many parameters that they influence the maximum transmittable torque, such as the number of poles, the rate of length and diameter, gap and magnetic material etc.

171. Main causes of throwing turret are: friction torque of friction clutch of turret traversing mechanism is not enough, and worm gear and worm of traversing mechanism are not self-locking.

172. The effects of skewed slot angle on the starting torque of a single phase asynchronous motor are demonstrated by theoretic analysis and by experiments.

173. To decrease the damage of grasping soft objects, an online joint torque predictive grasping control scheme is proposed based on external torque control loops.

174. This torque distribution control ensures smooth turning and steering, as well as stable driving in all climates.

175. It is significant for equivalence principle test for extended rotating bodies with a torsion balance to measure the internal friction torque of a gyroscope.

176. Since there are some problems on 380DB clutch, such as weak torque capacity and friction disc burnout, the new 395DB clutch is developed.

177. This method has been for many times used for date-processing in tests of hydraulic torque converter and proved to be useful and effective.

178. It's the product of efficiency for hydraulic torque converter and planetary gear - box.

179. Power Train Twin turbine torque converter, which employs CAT technology, and the power shift transmission features compact structure, high efficiency, reliable performance[http://Sentencedict.com], and operational ease.

180. Both revealed that the spring coupling should be used in the transmission system of slab conveying roller in order to reduce the peak-load while bearing a great impulsive torque.