Random good picture Not show

91. In container bags inner polyethylene bags of 1000 kilos net.

92. Wood is a natural polymer in the same manner that polymers of ethylene are joined to form polyethylene , glucose monomers polymerize in wood to form cellulose polymers .

93. This type of sealant mainly butyl rubber, high molecular weight polyisobutylene, a certain degree of polymerization of acrylic, chlorosulfonated polyethylene and neoprene rubber sealant.

94. Electrofusion welding is now an essential and widely used method in application to the polyethylene pressure pipeline systems.

95. The water resistence and aging resistance of chlorosulfonated polyethylene ( CSM ) were improved througth the optimum colourful ingredients choice.

96. The present paper discusses the effect of temperature and humidity on the electric strength of low-density polyethylene(LDPE)film for various stressing modes.

97. All loose or damaged polyethylene shall be trimmed back to sound coating prior to cleaning, and the edge of the polyethylene shall be bevelled at an angle of 30( with the steel surface.

98. The flame retardance of red phosphorus and aluminium hydroxide filled polyethylene was studied.

99. Polystyrene supported polyethylene glycol was used as catalyst in the condensation reaction of citral and acetone, yield of pseudoionone was 77.4%.

100. The blended fiber spinning of PVP with polyethylene oxide (PEO), S-630 and poly (vinylidene fluoride)(PVDF) was also studied.

101. This paper modified silane crosslinked polyethylene ( PE ) insulant for power cable with ethylene - vinyl acetate copolymer ( EVA ) .

102. The new sensitive material of rotary screen was prepared with diazo- colophony photosensitizer and polyethylene alcohol, epoxy adhesive,[Sentencedict.com] delitescent solidified agent.

103. The effect of lanthana doping and polyethylene glycol as gelatinization aid on the thermostability and BET surface of active A12O3 prepared by means of sol in water solution.

104. A series of polymerizable nonionic urethane surfactants were synthesized with 2, 4-tolylene di-iso-cyanate(2,4-TDI), polyethylene glycols(PEG) of different molecular weight and allyl alcohol.

105. Conclusion; Vacuum package and paper-plastic package are better than polyethylene package in avouching for the quality of honey-fried Bulbus Lilii.

106. The site includes capacity for acetic acid, vinyl acetate monomer, acetic anhydride, as well as vinyl acetate emulsions, GUR ultra high molecular weight polyethylene and Celstran.

107. As polyethylene wear secondary to a high activity level could be problematic, hard-on-hard bearings have been proposed to reduce wear.

108. The polyethylene surface shall be roughened by abrasive blast cleaning for a minimum length of 100mm from each cutback area.

109. The influence of glass fiber,[sentencedict.com/polyethylene.html] flame retardant and nucleating agent on the crystallinity and mechanical properties of polyethylene terephthalate (PET) was investigated.

110. The result showed that polyethylene glycol diglycidyl ether cross linked sericin obviously.

111. The effects of heating, tensile and high pressure treatments on the aggregate structure of low density polyethylene (PE-LD) samples were studied using a modulated DSC (MDSC).

112. The effect of ionomer styrene-sodium acrylate(SAA-Na) on the crystallization and melting behaviors of polyethylene terephthalate(PET) was investigated by using differential scanning calorimetry(DSC).

113. Ultra-high molecular weight polyethylene (UHMWPE) fiber is the fourth important high-tenacity fiber following carbon fiber, boron fiber and polyurethane fiber.

114. The infusibility material in HCPE varnish is mainly composed of a kind of insulation agent and the low chlorinated polyethylene.

115. After the development research of degradable plastic, the study of pyrolysis on ordinary polyolefine especially polyethylene has become the mian direction of research.

116. The facility is also a world-scale chemical plant, pumping out thousands of tons of polyethylene and polypropylene, the building blocks of plastic, and paraxylene, which gets turned into polyester.

117. The invention discloses oil for polypropylene fibers, which is formed by mixing potassium cetanol phosphate, polyethylene glycol (800) oleate, polyoxyethylene castor oil and white oil.

118. Use viscometry to determine viscosity-average molecular weight of oxidated polyethylene wax and introduce the measurement, process and effect factors in detail.

119. Coating: Hypromellose, polyethylene glycol 300, titanium dioxide, red ferric oxide and yellow ferric oxide.

120. This is a compostable bioplastic which retracts at temperatures lower than polyethylene terephthalate.