Random good picture Not show

181. Based on the theoretical and experimental results, the further analysis was made to ascertain the total losses and constitution of losses in a pump turbine vo...

182. The phenomenon and cause of the secondary flow in plane turbine cascades are discussed and a mathematical prediction model of losses is presented.

183. The one-level turbine engine with one pump is composed of a turbine, a turbine shaft, a booster pump wheel and an expansion chamber shell.

184. A hydraulic turbine leaf of transmit water current relay machine displacement transmission device is designed based on the principles of capacitance sensor.

185. It can be used properly by adding a new designed regenerator in an existing simple cycle gas turbine to make this gas turbine system reach an optimal performance.

186. The Michell turbine is very amenable to power control by means of narrowing the feed-nozzle width and for fine control by means of a throttle plate in the throat of the feed-nozzle.

187. Thirdly, based on the dynamic grid method, the steady and unsteady simulation for the single cycle Kaplan turbine was conducted to study combined optimization.

188. The NC machining of hydraulic turbine blades is discussed with emphasis on blank margin control, marking inspection of blades, setting-up of blades, and machining and trimming of blades.

189. It provided a feasible and effective method for structural modification of large - scale wind turbine.

190. The stability of jet is a very important factor that affects efficiency and output as well as the vibration of impulse turbine.

191. The measuring system with microcomputer for inlet and outlet flow field of the Francis turbine runner is described. The pitot probe with 5 holes was used as sensing element.

192. The mechanical properties of fine grain cast and conventional cast integral turbine wheel were evaluated.

193. The fast cooling technology of steam turbine is the process that the cooling medium is used to accelerate the temperature reduction of cylinder and rotor after the shutdown of turbogenerator.

194. The vibration standard system puts into the use may enhance vibrates the sensor the examination, the test precision and the turbine wheel electric power facility reliability.

195. This paper gives some experiences and views the author has gained in the manufacture of marine gas turbine split casings.

196. The hydraulic fluid temperature has an effect on the meterage precision of the turbine flux transmitter.

197. And the cost of installing a small turbine is high-up to $22,000.

198. Finally, availability factor is classified into un-rated availability factor and rated availability factor, which can clearly express the detailed information of wind turbine operation.

199. The optimal performance of a real plant is obtained in terms of the internal efficiency of the compressor and that of the turbine. which represent the internal irreversibility of the plant.

200. The controller provides an adaptive estimate of the turbine shaft torque as a torque reference for a field oriented squirrel cage induction machine.

201. In order to fit in with the structural features of the radial-flow turbine, some improvements have been made in treatments as well as the computer program.

202. The author proposed a method for calculating the critical inlet plane angle of a transonic turbine blade cascade.

203. The top-level design of micro turbine Jet - engine is presented in the paper.

204. On this particular turbocharger turbine wheel I used the inner races of two ball bearings to prevent the shaft from moving axially.

205. An air blowing experiment is done on a cascade of a pulse trans-sonic plane turbine cascade tunnel.

206. The paper discusses some problems on small steam turbine generator unit for low vacuum heating.

207. Platform friction damper is an effective measure to reduce the blade vibration in gas turbine.

208. In practice,[Sentencedict.com ] the turbine disc and the nozzles are fitted into a casing.

209. The inner flow of turbine is 3D viscid, incompressible and unsteady turbulent flow.

210. The broken reasons of bailer of impeller was found out by analyzing some relevant cases occurred in a jet-type impulse turbine in China, some measures to handling it was presented.