Random good picture Not show

91) Flame retarding mechanism, influence factors of anti-flammability and application of epoxy encapsulating materials for polyester film capacitor were described in this paper.

92) The current use of the broader markinf colophony polyester are polyamic, acetate copolymers and polyurethane, etc.

93) In this paper, the relation of tensile strength, tensile modulus and breaking elongation of unsaturated polyester casting matrix cured at room temperature to curing degree was discussed.

94) If necessary, nylon, acrylic and polyester fibers may be bleached with sodium chlorite under acidic conditions.

95) Results Al i phatic polyester , polyanhydride, polyurethane and poly were the most extensively studied synthetic biodegradable polymers as bone substitutes and the scaffolds.

96) Purified terephthalic acid(PTA), one of the most important feedstocks of polyester, is produced by p-xylene(PX) liquid phase oxidation.

97) A type of polyurethane resin cured at room temperature was prepared for making cast mould, which included two components i. e. polyester polyols A and polyisocyanate B.

98) Patch pocket at the left chest is ideal for keeping scorecards at hand. 95% cotton, 5% polyester.

99) And the finishing technology and operational process are suggested in relation to using 120 denier cationic dyeable Iustre modified polyester filament as loop yarn.

100) The effect of some components, such as initiator AIBN, methacrylate and unsaturated polyester, of impregnation microporosity sealants on their heat resistance were studied.

101) Lycra cotton series: artificial cotton Lycra cotton, acrylic fiber Lycra cotton, polyester Lycra, stretch cotton,(http://sentencedict.com/polyester.html) etc.

102) Polylactic acid (PLA) is a linear aliphatic polyester produced by poly-condensation of naturally produced lactic acid or by the catalytic ring opening of the lactide group.

103) The brightening polyester chip is made by addition of brightening agent during the polymerisation.

104) Medium for polyester, polypropylene, polyphenylene sulfide film and so on.

105) By the alcohols and diacids or W - hydroxy acid synthesis of polyester line criminal macromolecules.

106) This article studied migration, dispersing and achromatic property of salt-resistance levelling agent TF-212B on polyester pongee under the existence of sodium sulphate.

107) In the process of catalysis and synthesis of polyester polyhydric alcohol by MSA, the catalyst performance of MSA was hatter than sulphuric acid.

108) The Fujia chemical plant is a producer of paraxylene, a petrochemical used to create raw materials for the production of polyester film and fabrics. The chemical is carcinogenic.

109) The other is wear-resistant pipe, including low-alloy steel pipe, alloy cast iron pipes, composite pipe, ceramic pipe, with rubber tubes, polyester materials, pipe, cast stone pipes.

110) Blending polycarbonate with aliphatic or alicyclic polyester is a valuable method to improve t...

111) ZFM series automatic film laminating machine adopts pre-coating polyester film as laminating materials, film lamination can raise the brightness of paper and protect it.

112) A radiation grafting of acrylic acid (AA) onto polyester to imparl a hydrophilic property was carried.

113) The polyester , polythylene adipate, was removed from the reactor.

114) HMLS polyester cord is a desired reinforcing material of radial tire.

115) The production equipment and process parameter for producing heavy denier and mult - filament polyester fiber are described.

116) Conventional dyeing processes for polyester, such as HTP and thermosol dyeing process, are suitable for flame retardant finish using YHD.

117) A hard polyester cord of good performance has been produced with a new technology including two-bath dipping, MAR adhesive agent and RFL adhesive agent.

118) During the process of spinning triangular heteroclite dacron fibres from polyester garbage, there are factors that may affect the hetercliteness of the intersecting surface of the fibres thus spun.

119) Applicable scope: semiconductor wafer, optical glass, horologe parts, glasses, jewelry, polyester filtering cores, etc.

120) The invention relates to a polyester amphipathic hyper-dispersant and a preparation method thereof to satisfy the demand of dispersion of solid particles in different polar media.