Random good picture Not show

211. A curable composition includes a functionalized poly(arylene ether) resin, an acryloyl monomer, and a phosphorus flame retardant.

212. LTD. has specialized rubber belts service and poly thane belts series used in industry.

213. MOR zeolite was dispersed into poly(ethylene glycol)oligomer to form a stable gel. Its Electrochemical behavior was first detected by a cyclic voltammeter.

214. And on the basis of device on-resistance study, we optimized the main factors of power VDMOS cellular on-resistance, such as poly width and the impurity concentration of epitaxial layer.

215. Poly(o-toluidine) (POT) nanofibers can be fabricated by using HAuCl4 instead of the traditional used ammonium persulfate as the oxidant through one-step chemical route.

216. Poly (amino acids) have good biological compatibility and degradability, and includes responsable active groups such as the hydroxyl, the carboxyl group, the amino group etc.

217. Adding poly acrylic acid ( PAA ) in the preparation of ammonium diuranate ( ADU ) was investigated.

218. After that, those successive Qin kings kept a poly to aggress the east.

219. This paper reports the synthesis of a series of poly (silyl ester)s by diacetoxylsilane with several dicarboxylic acid.

220. The electrochemical behavior of dobutamine in poly(alizarin red) film modified electrodes(PAR/GCE) has been studied by cyclic voltammetry.

221. The new methods allow a wide range of poly analogs to be obtained in few steps, as the allylic precursors are readily available.

222. Starting from D, Llactic acid and glycolic acid, biodegradable drug delivery material poly(lactic acid-glycolic acid) (PLGA) was directly synthesized via melt polycondensation.

223. Poly Feng said high land prices per square meter in 37 daily rent money.

224. Using trimethylamine, epoxy chloropropane and poly (vinyl alcohol) as materials, the quaternary cationic poly (vinyl alcohol) was synthesized.

225. Poly alcohol has been protected against radiation by benzalation and benzoylation.

226. The poly(tetrafluoroethylene) particles untreated with quenching showed poor abrasion performance with 22% wear rate after 10 weeks, despite better scale-preventing and scale-removing performance.

227. Applications of poly (fluorinated ethylene-propylene) and tetrafluoroethylene-perfluoroalkyl vinyl ether copolymer in such the industries as electronic, chemistry, machine and foodstuff are described.

228. This detector line array is fabricated using 2 micron design rule and a double level poly silicon structure.

228. Sentencedict.com is a sentence dictionary, on which you can find excellent sentences for a large number of words.

229. Poly ( p - dioxanone ) ( PPDO ) and Poly ( ε - caprolactone ) ( PCL ) are both aliphatic polyester.

230. Poly ester synthetic (phenyl ether), polyester film, laminates sheet, printed wiring board, and multilayer printed wiring board.

231. The Poly(AM-MA) copolymer was synthesized through radical polymerization of acrylamide(AM) with maleic acid anhydride(MA).

232. Amphiphilic poly(vinyl pyridine)(PVP) with uniform polyoxyethylene(PEO) was synthesized by copolymerization of the PEO macromer with 2-vinyl pyridine in benzene, using AIBN as initiator.

233. Through absorption of bromine vapor, the electrical conductivity of poly(phenylacetylene) (PPA) was enhanced by 1012 times.

234. Acryloyloxystarch was prepared and used as the parent for free radical initiated graft copolymerization with the end functionalized hydroxyethyl methacrylate macromonomer of poly (D, L lactide).

235. Poly(aspartic acid) has the structure of the imide ring and can be grafted with the functional side chains of condensing DNA by ring-opening with alkaline reagents.

236. Other reactive templates can also be used for the preparation of glod nanoparticles supported on polymer, such as poly(o-toluidine) and poly(o-methoxyaniline) hollow microspheres, and PANI nanotubes.

237. Lactide is the midbody for the preparation of poly(lactic acid), the ratio of lactic acid to lactide is low and hamper the extensive application of PLA.

238. Poly(succinimide)(PSI) was synthesized by polycondensation of L-aspartic acid in a solvent. The effects of the catalyst, reaction time and solvent on the reaction were studied.

239. The preparation methods, mechanism of forming film, film properties and application fields of poly(p-xylylene) are reviewed.

240. The system investigated are the solutions of monosilicic acid and poly silicic acids with different polymerization degrees.