Random good picture Not show

91. Close the gunk flashboard and shot out all the plastics in the barrel under manual condition.

92. A medicated inhalant dispenser (1) has a plastics material body (2) having a mouthpiece (3).

93. Model for rod and pipe extrudate of amorphous plastics cooled in water bath is built based on heat transfer theory.

94. It can be used to metalize holes of PCB and plate on plastics.

95. The adding amount of starch and supplementary material may be as high as 40-60 percent, and the conventional equipment of starch mills and plastics mills may be used.

96. For a specific domain on plastics, an automatic abstracting system is implemented. The precision and recall of multi-document's automatic abstracting is above 75%.

97. Because of combined properties, PET is widely used in synthetic fibre, film and engineering plastics etc.

98. And plastics, including polystyrene, are common in the wads of accumulated undigested matter that young black-footed albatrosses cough up before they fledge, Henry says.

99. Any of several stable, light-fast, blue or green organic pigments derived from the basic compound(C6H4C2N)4N4 and used in enamels, printing inks, linoleum, and plastics.

100. Cans use in china, Porcelain enamel, Plastic, Glass reinforced plastics wait for material quality's pump, valve, Pagoda mouth's entrance connection.

101. All the plastics pipe system is a good example of the latter. This uses a plastic service pipe instead of the usual steel or copper pipe.

102. Conclusion: This preparation is consistent with the quality specification of plastics in China Pharmacopoeia.

103. SOLVAY GmbH offers information to Plastics processing in addition to Special chemicals.

104. Though plastics have benefits , Baker says, there a lot of gratuitous use.

105. Starch - based biodegradable plastics is a kind of important degradable polymer material.

106. Suit for the process of mixing, emulsifying, color-matching, textile plasticizing and heating in the department of refined manufacture, plastics,(http://sentencedict.com/plastics.html) synthetized-fibers and ore- metalizing .

107. The surfactant is an important component of phenolic foam plastics.

108. The theme of this forum is about the safety and the responsibility of the plastics industry.

109. Is simply, oneself stuck up, once the left hand touch the pocket in Qin Dynasty and now after grasp a pack of pearly abrasive worn with the plastics sack in hand, shine let him look.

110. Plastics are now often used in place of wood or metal.

111. Most LEDs and OLEDs are tiny wafers—"they look like a squashed pea," says Brodrick—made of semiconducting metallic compounds, usually surrounded by hard plastics.

112. They were satisfactory compatibility with non-metal materials such as acrylic plastics, painted surfaces, and insulated wire.

113. The device meets Energy Star and EPEAT Gold standards, while integrating halogen-free laminates and using a chassis composed of 25-percent post-consumer recycled plastics.

114. Paraxylene is used in the production of polyester fibers and plastic bottles. Benzene is an industrial chemical used to produce a wide range of plastics, detergents and other chemicals.

115. Black specks in film or sheet–especially in light-colored or clear plastics–lead to scrap, unscheduled shutdowns, and dissatisfied customers.

116. This method was of simple, speed, accurate which was suitable to the determination of di(2-ethyl hexyl) adipate in polyvinyl chloride plastics materials and products.

117. Many plastics have high surface resistance and low electrical conductivity.

118. The development prospect of the talc used in plastics industry are discussed.

119. Demonstrated detailed knowledge & understanding of Plastics Injection Moulding & Tooling .

120. The paper introduces the new application of plastics and its composites in ordnance, including using them as materials for armor, gun barrel, rotating band, obturator and sabot.