Random good picture Not show

151. These electrons will not pass into the phototube because of the insulation on the metal plate.

152. Brushless, self-rotating magnetic field, H insulation grade level, the level of protection IP22, AVR automatic voltage regulatdevice.

153. Measure each phase conductor to metal mask and to metal sleeve insulation resistance.

154. As binding agent, used for fireproof heat insulation casting material, fabricated parts , fireclay and repairing material, plastic unburned brick etc.

155. Relay. Coil voltage 5 VDC. Contact arrangement 1B. Cover dust cover. Insulation class F.

156. Heaters of high temperature, such as soldering irons, should be kept away from the vinyl insulation sleeve of capacitor which to avoid the cause made over heat or break down to sleeve.

157. Applicable scope: For fire blanket, thermal insulation interlining in high working temperature, placemat, packing sheet etc.

158. The difference between the Eskimo igloo and the Indian tepee was insulation: the igloo's walls were solid and airtight whereas those of the tepee permitted a great deal of air to enter.

159. The primary and secondary windings are insulated by epoxy resin. It has a good ability of insulation and moisture proof.

160. For measuring evaporation of shallow water lake and reservoir located in plain, it is important to know evaporative law of hydrophyte. The evaporation pan must be used with heat insulation.

161. The measurement of dielectric loss angle is one of the main methods in the preventive tests for the insulation of electrical equipment.

162. Miscellaneous anchors, fasteners, adhesives, insulation, vapor barrier, sealants , and related accessories.

162. Sentencedict.com try its best to gather and build good sentences.

163. Thermal protector shall be resettable and have a protection setting NTE the thermal insulation class of the motor.

164. Besides the tropical look, one of the advantages of a thick thatching material is insulation against heat from the sun.

165. Applied to knapsack & sports bags , insulation bags and cooling container.

166. Electrical insulation grade I level, lamp protection levels to meet IP 65.

167. Relay. Coil voltage 18 VDC. Contact arrangement 1C. Cover sealed. Insulation class B.

168. It is the thermal stabilizer and lubricant for PVC with excellent transparently , light stability(sentencedict.com), water-resistance and electrical insulation.

169. The exhaust pipe engine room will be insulated, after insulation the outside surface temperature ≯60 ℃.

170. The sound insulation property of aluminum foam(Al-foam) with composite structure was studied using a self-made equipment and sound detector.

171. Taking characteristic gas of insulation oil cleavage for example, the extent of bubble-liquid two-phase oil flow cleavage was quantitatively analyzed.

172. However, in coaxial oil-paper combination insulation when the thickness of insulation exceeds a certain value the field strength within the pressboard under polarity reversal will increase instead.

173. Transformer oil purifier applies for filtrating and dehydrating transformer oil, mutual conductor oil, switch oil and other kinds of insulation oils.

174. The state-run news website Eastday.com cited a construction worker surnamed Qian who escaped from the 28th story as saying crews were installing energy-saving insulation when the fire occurred.

175. Line frequency withstand voltage test is a test - voltage appliance's solid insulation and the capacity short time - voltage.

176. The primary purpose is retention of electrical insulation and low - loss properties after extensive exposure to water.

177. Other parts of the insulation system, for example requirements for solid insulation and for electric strength testing, must be capable of withstanding the higher transient voltages (see IEC 60664-1).

178. Ceramic insulator provides stronger resistance against thermal shock, greater mechanic and electric strength and reliable insulation.

179. The recent applications of the flexible TPS are reviewed and its viable design concept is pointed out to be a multi-layer insulation (MLI) covered with high temperature coatings.

180. Features: Excellent insulation and heat proof, small size, low dissipation, good reliability of capacitance.