Random good picture Not show

241. I have it on good authority that this story was fabricated.

242. A 2-word 2-bit adder has been fabricated using conventional MOS technology. Design considerations and experimental results are ...

243. The phosphorus - doped diamond - like carbon ( DLC ) films were fabricated by plasma immersion ion implantation and deposition ( P - D ) .

244. At last, the isolation amplifier is designed, fabricated and tested and2%accuracy is demonstrated.

245. Lead titanate nanorods with different length and diameter ratios have been successfully fabricated via hydrothermal method, PVA and PAA with different concentrations assisted as additives.

246. In this paper, we report a lead salt tunable diode laser fabricated by HUVG.

247. We have fabricated six devices for electrical characterizations. The devices are positioned in a cryostat for a change of environmental temperature from 300 K down to 80 K.

248. By optimizing the etching parameters, waveguides with smoother side - walls and smaller propagation loss are fabricated successfully.

249. With the fabricated preforms , the pressure casting process of porous aluminum alloy was studied.

250. PTFE matrix composites were fabricated using mixing nano sized powder process and vaporizing impregnant process.

251. Measured results of the fabricated filter show near ideal band-pass response and demonstrate the potential for this technique.

252. The organic thin film electroluminescence device with blue green color using new organic material , silicon alkyl derivative(SCS SiH), was fabricated.

253. The room temperature ferromagnetism in Co-doped ZnO films with different carrier concentration fabricated by the sol–gel method at different annealing atmospheres was investigated.

254. The lower prestressed fabricated arch is a new type of latticed steel structure made up of square steel tubes.

255. The electrophoretic microchip fabricated by MEMS technology is successfully used to finish the electrophoresis process.

256. B. Base Metals: Produce door hardware units of base metal indicated, fabricated by forming method indicated, using manufacturer's standard metal alloy, composition, temper, and hardness.

257. The closed cell polyimide foams were fabricated by foaming the precursor balloons, and the foams' acoustic absorption properties were tested.sentencedict .com

258. Depletion Model Selective doped heterojunction transistor is designed and fabricated.

259. Poly(o-toluidine) (POT) nanofibers can be fabricated by using HAuCl4 instead of the traditional used ammonium persulfate as the oxidant through one-step chemical route.

260. A whistle-blower's e-mail from someone at the authors' institution indicated that data in the study were fabricated.

261. First of all, 1-Hexadecene self-assembled monolayers was fabricated on hydrogen-terminated silicon surface by traditional way and was checked by XPS and Raman spectrum technology.

262. At the same time, along with the ancient Greek era of navigation and maritime trade, constantly brought back to the ancient Greeks in Western Asia, fabricated metal products, jewelry, ivory.

263. The bone tissue fabricated in RWV with two different seeded cell densities grew well. Osteoblasts in the scaffolds secreted much collagen fibers and formed mineralized nodules and new osteoid tissue.

264. This clock was fabricated by the finest craftsman in 1880.

265. A bi - layer piezoresistive micro - cantilever with metal film is designed and fabricated.

266. In recent years, a new fabricated material called left-handed materials (LHM) attracts a great deal of attention.

267. Based on this, infrared detector and field effect transistor were fabricated and also tested.

268. The main results and conclusions can be summarized as follows:AAO template with highly ordered pores was fabricated in acidic solution by using anodization method.

269. These devices are fabricated utilizing molecular beam epitaxy manufacturing techniques and feature rugged construction and consistent electrical performance.

270. There are basically two assembling forms of diathermanous inductor's furnace lining, the first is knot type furnace lining while the other is fabricated furnace lining.