Random good picture Not show

121. All patients had a 3-month-baseline-seizure count, after which they underwent bilateral hippocampal diagnostic electrode implantation to establish focus laterality and location.

122. The electrochemical oxidation of quercetin ( QUE ) at a glassy carbon electrode has been investigated.

123. The modified electrode can be applied to the electrochemical determination of catechol and hydroquinone.

124. Method The recording technique for Franz MAP contact electrode is used.

125. Two salt bridges are arranged in the composite electrode to fill ring-shaped flexible diaphragm formed by hot pressing of potassium chloride, thus providing ion exchanging paths between solutions.

126. A split electrode piezoelectric composite suspension, based on the width bending mode, was designed for the dual stage servo system of rigid disk drive.

127. The arc is obtained by applying a magneticfield coaxial with the electrode to constrict an open arc in medium vacuum.

128. A process for fabricating CuCrZr alloy spot-welding electrode by three cold extrusions is developed, with effect of cold deformation on alloy properties explored.

129. The conductive layer has a first conductivity type emitter diffusion layer in contact with the emitter electrode through the protruding portion and a second conductivity type base layer.

130. The thin-layer cyclic voltammocharacter of adrenaline in different pH value media had been firstly investigated on graphite and platinum electrode by using cyclic voltammetry.

131. In addition, the influence of the spark energy, the gas stream speed and the electrode distance on the lean ignition limit of the gasoline-air mixtures by an automobile ignition coil was determined.

132. LDH was successfully immobilized on Au colloid associated with a cysteamine monolayer on a gold electrode surface to construct a nanometer-sized bionic function interface.

133. The internal reference electrode is composed of silver foil, a silver chloride layer and a dry internal reference electrolyte layer.

134. The carbonaceous porous body constituting the enzymatic electrode is preferably carbonaceous gel.

135. Electrochemical battery cells, and more particularly, to cells comprising a lithium negative electrode and an iron disulfide positive electrode.

136. In this paper, a variable model of optimum droplet transfer mode for pulsed GMA welding using a steel electrode is developed on the principle of the micro-interference instability of magnetofluid.

137. The effects of macroscopic fracture surface patterns and microstructure of slag of stainless steel electrode on the slag detachability have been analyzed.

138. The grid insulation layer is arranged on the base - plate and covers the grid electrode.

139. His firm's technology has reduced the brainwave pickup to the minimum specification imaginable - a single electrode.

140. The stability of the welding arc depends mainly on the voltage and the gas ionization when current zero-crossing as well as the electron emission ability of the electrode.

141. The voltammetric behavior and oxidation mechanism of loperamide were investigated by cyclic voltammetry and coulometry at a multi-wall carbon nanotube paste electrode(MCNT-PE).

142. A gate electrode strip is over the first and the second active regions and forms a first MOS device and a second MOS device with the first active region and the second active region, respectively.

143. Cut off frequency is the main factor influencing frequency properties of electrode circuits of common emitter, common base and common collector.

144. In discussing cells, one calls the electrode at which reductions occur the cathode.

145. Influence of the rotating grounding electrode on dielectric barrier discharge ( DBD ) was studied.

146. We determined L-lysine with chicken tissue based electrode,(http://sentencedict.com/electrode.html) which employed chicken kidney slice as the source of L-lysine oxidase and an oxygen gas sensitive electrode as the base electrode.

147. The remaining buffer cations are attracted to the negative electrode, dragging the bulk buffer solution with them.

148. To provide an electrode sheet which has ensured electroconductivity of a wiring layer.

149. Electroslag remelting's consumable electrode current is determined by the distance between electrode and slag bath which is determined by the rotate speed of motors driven by electrode.

150. The ring - shaped source electrode is configured on the grid insulation layer.