Random good picture Not show

31. The RW Series Rotary Actuator design utilizes two independent piston cylinders, each piston has a crank arm attached to a crankshaft.

32. Based on a study of the traditional balancing method for crankshaft, a new method is proposed and a new crankshaft dynamic balancing machine is accordingly developed and presented in this paper.

33. The crankshaft makes three rotations for each rotation of the rotor.

34. The irrational distribution of crankshaft counterbalance weight causes greater vibration.

35. The reasons include inappropriate maintenance, component failures, filter blockage, bad crankshaft bearing shells, inappropriate fit clearances, abnormal diesel engine vibration and etc.

36. Crankshaft, piston, plunger piston, guider, guide rail, rotary drum, slide block, and various abrasive wear surface.

37. As the piston moves up and down in the cylinder it rotates the crankshaft and converts the straight line motion into rotary motion.

38. At the beginning of the third stroke of the cycle of operations, the piston is once again at TDC, the crankshaft having turned through one full revolution.

39. The crankshaft brush plating procedure was formulated which was used for repairing a L195 diesel engine crankshaft. The durability of various operating mode was tested on a hydraulic dynamometer .

40. At last this dissertation analyzes affection of different size of round angle to the stress of the crankshaft, checks the margin of fatigue resistance and gets the margin of safety.

41. One reason for the slipper piston is that, on the short-stroke, over square engine, the piston skirt had to be cut away to make room for the counterweights on the crankshaft.

42. In this system the crankshaft rotating angle, where the peak combustion pressure occurs, is taken to be a feed back signal, so that the ignition timing of the engine is able to be controlled.

43. Boring-cylinder car to provide professional, grinding crankshaft, cylinder repair, spare parts processing, a series of payments processing services.

44. Some castings, such as crankshaft,[www.Sentencedict.com] rocker arm et al were produced.

45. The method of crankshaft vibration damper property and reliability experiments are discussed.

46. The lower end of the connecting rod fits the crankshaft journal.

47. The connecting rod links its large end to the crankshaft and its small end to the piston.

48. The feasibility and efficiency in the design of new medium-speed diesel engine by using FEM is confirmed in the research on the crankshaft and the cylinder line.

49. The adjustment method of crankshaft deflection is improved by the means of FEM, in which the infection of gravity and deformation of crankshaft, crankpin and crank web are included.

50. It's crankshaft adopts the craft that the right and left cranks manufactured separately and combined assembly with connected rod. Balance of crankshaft can't alone emended.

51. The reason why crankshaft must be equipped the equivalent ring at the crankpin when the dynamical equilibrium test is made is pointed out.

52. Crank is a very important component of crankshaft in large marine engine.

53. The connecting rod is attached at one end to a crankpin on the crankshaft and at the other end to a piston, through a piston pin or wrist pin.

54. This paper described the foundry technology of horizontal pouring and solidifying to produce large hollow ductile iron crankshaft cast in sand coated iron mould.

55. This working space is at the end away from the crankshaft, that is, at the upper end of a vertical engine.

56. Remove vibration damper bolt and washer from end of crankshaft.

57. In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.

58. Experimental results showed that above gas nitrocarburing of nodular graphite cast iron crankshaft are superior to those of forged steel crankshaft.

59. Supercharger compressor from the driving force of the engine crankshaft.

60. Through the simulation of engine misfire by the misfire malfunction simulation device, the fluctuation of crankshaft instantaneous speed was analyzed.