Random good picture Not show

151. The time domain dielectric spectroscopy for polyethylene terephthalate ( PET ) film and glass samples is studies.

152. The direct buried cable (for long distance application) shall be additionally protected by a HDPE pipe (High Density Polyethylene) or a duct linear, which shall be extruded in the factory.

153. In the presence of ethanonitrile and polyethylene glycol, anthrone reacts with ammonium ceric nitrate to form 1 nitroanthraquinone.

154. Most commercial water is packaged in PET bottles (polyethylene terephthalate ) which are inexpensive to recycle and do not release chlorine if burned.

155. Vinyl, nylon, and Lucite. are markedly inferior to Teflon, polystyrene, polyethylene, sapphire, or quartz.

156. The results showed as follows: low temperature or packing with polyethylene film bag with silicone rubber window pouch could decrease respiration rate of chinquapin fruit.

157. A comparison of metallocene polyethylene elastomers ( mPE ) and ethylene - propylene terpolymer ( EPDM ) was made in toughening modification of polypropylene ( PP ) .

158. The investment shell mold was made of polyethylene wax and colloidal silica.

159. Polyvinyl chloride - polyethylene polyamine resin is a new polymer phase transfer catalyst.

160. PE Tugongmo, composite Tugongmo and polyethylene manufactured ; Bianzhibu, sacks, earthwork erected, rubber Zhishuidai wholesale and retail.

161. Polyethylene glycol ( PEG ) is a kind of phase change materials with high enthalpy and low thermal hysteresis.

162. The structure, characteristics, quality identification, and job practice of polyethylene - aluminum - polyethylene composite pipe are introduced.

163. Features: Prevent condensation: This material is closed cell structure, it is by the gas within the closed cell insulation material rather than polyethylene to achieve insulation.

164. The biopolymer polyhydroxyalkanoate came next on the list. Polyvinyl chloride (PVC) and polyethylene terephthalate (PET) were ranked last.

165. The influences of preheat treatment temperature and time on the friction and wear behavior of ultra high molecular weight polyethylene(UHMWPE) were investigated on a pin-on-disc test rig.

166. Nhot draw tunic from the early 90 s label r & d polyethylene film.

167. Oil, grease and other contaminants shall be removed from the steel and adjacent polyethylene surfaces by solvent cleaning in accordance with SSPC SP1 prior to abrasive blast cleaning.

168. The researchers attached heparin - binding peptides from antithrombin III to a synthetic material called polyethylene glycol.

168. Sentencedict.com is a sentence dictionary, on which you can find nice sentences for a large number of words.

169. The kinetics of thermal oxidation of rosin and abietic acid absorbed on the polyethylene film were respectively studied. The kinetic equation of heat oxidation was determined by UV spectrophotometry.

170. To blend a small amount of chlorinated polyethylene(CPE)into polyethylene, the space charges in samples are greatly decreased and the field distribution trends to uniform.

171. Insulation: High density polyethylene or polypropylene, color coded in accordance with standard telephone industry code.

172. The experimental results showed that red phosphorus , combined with aluminium hydroxide, had outstanding synergistic effect and was a good flame retardant for polyethylene.

173. The assistant stabilizing agent is dibenzoyl methane, stearic acid, polyethylene wax or compound thereof.

174. The effects of technical factors on photografting reaction of low - density polyethylene (LDPE) using benzophenone as photosensitizers were studied under air atmosphere.

175. Cyclohexanone and n - butanol as solvents, the process has been investigated to extract polyethylene polyamines.

176. Structural softwood decking beneath a polyethylene vapour barrier and deep I-beam rafters supports 500 mm of cellulose fibre insulation.

177. In this paper, waste wood flour was used to reinforce high - density polyethylene ( HDPE ) .

178. The Numatics Actuator Group Hole Punch Cylinder is perfect for punching holes in LLDPE (Linear Density Polyethylene) film.

179. With increasing the electron withdrawing substituents in the phenoxy ring, the catalytic activity was increased, and the molecular weight of polyethylene decreased.

180. The partial discharge and surface charge on organic glass are easier been observed than those on polyethylene, and the organic glass insulator flashover voltage is lower.