Random good picture Not show

(91) It points that the lead tolerance in molten iron should be under 0.0008% if the reject rate is controlled under 0.5% in casting the complicated engine cylinders.

(92) By increasing the weld heat input, the distribution of martensite becomes more dispersive and glomerate due to the molten pool stiring, the welding stress and the burning loss of alloy elements.

(93) It mainly discussed the basic principle, capability characteristic and the feasibility simulation test of the new method of centrifugal graining machine for water quenching molten steel slag.

(94) Molten solder droplet bumping (MSDB) is adapted to the requirement of high-density packaging and has distinctive advantages.

(95) Plasma transferred arc produces the induced electromagnetic field that makes liquid metal convect in molten pool in the surface metallurgical course.

(96) The fibre diameter increases with increasing fluidity of the molten oxide.

(97) The effect of molten steel purity, casting temperature, performance of protecting slag, oscillation and liquid level control of mold in continuous casting on surface defect wa.

(98) As a result, it is possible to get a better discharge flow in the feeding zone of the ingot mold where the discharge device of molten steel is placed, in addition to less turbulence.

(99) After CLEARING, tissues are placed in two or three baths of molten paraffin wax.

(100) Geysers spout up where a column of underground water is heated to boiling by "magma, " or molten rock. Like a pan boiling over on your kitchen stove, this boiling pushes the water upward.

(101) A feed liquid, for example, a molten fat, is formed into at least one sheet of flowing particles and is cooled by directing cryogen at the particles from both sides of the sheet.

(102) They made a calf in Horeb And worshiped a molten image.

(103) At deeper levels, the volcanic deposits were intruded by molten magma, which slowly crystallised to form granite.

(104) The concentration difference cell method has been used widely to determine O in the molten metals.

(105) Carburization of molten iron in the dropping zone of BF has been studied.

(105) Sentencedict.com is a sentence dictionary, on which you can find excellent sentences for a large number of words.

(106) According to the thermodynamic equations, the laws of ladle lining temperature distribution and the real-time temperature of molten steel in ladle during tapping are calculated.

(107) It is necessary to extract molten pool geometrical parameters in real time or to extract back bead width off-line either in seam tracking or in penetration control.

(108) From the results, solution mechanism of alumina in molten cryolite was discussed.

(109) An employee pours molten aluminum at United Company Rusal's Bogoslovsky aluminum smelter, Russia.

(110) The application of new technologies solves the problem of dust contamination, increases the purity of molten iron and improves the automatic control to the furnace.

(111) Igneous Rock , rock formed when molten or partially molten material, called magma, cools and solidifies.

(112) The discourse includes the principles of the continuous determination of oxygen in molten steel and the compounded continuous thermometric sensor and their application.

(113) The molten carbonate fuel cell ( MCFC ) - gas turbine hybrid system was analyzed.

(114) Some preparation technology, such as the method of water quenching the molten alloy and explosive welding, are briefly introduced.

(115) In this paper, aluminum - scandium alloys were prepared starting form scandium oxide by molten salt electrolysis.

(116) The sample was molten and decomposed with sodium peroxide , leached and acidified hot water and - volumed.

(117) The undercooled DZ125 superalloy was investigated by the method of glass and molten salt purification combined with cycled superheating, the mechanism of purification by compound salt was discussed.

(118) Blowing gas and adding denitrogenation agent can decrease effectively the nitrogen content in molten.

(119) Portion of the molten part sticks to the chain stitch yarn (21) and inserting yarn (22).

(120) ZrO 2 - mullite compound powders were prepared from zircon in molten salt medium.