Random good picture Not show

121. Although the ignition delay period of E-diesel was postponed, the combustion duration was shortened and the mean indication pressure was enhanced.

122. The ESA system on CROWN 3.0 is an ignition system that is controlled by computer, the main effects of which is to control the advanced ignition angel.

123. Carburetor: Device for supplying a spark ignition engine with a mixture of fuel and air.

124. The effects of converter position, ignition timing and idle speed on catalytic converter light-off behavior were studied on an electronically controlled LPG injection engine.

125. The results show that the multi-time ignition can improve ignition reliability, especially when ignition timing is too advance or too late, or air fuel ratio is far from the best ratio of ignition.

126. This stand-up JET SKI watercraft was powered by a high-revving 294 cm3 reed-valve Single with CD ignition and water-jacketed exhaust.

127. At ignition, it will pour a million liters of water onto the launch pad surface.

127. Sentencedict.com is a online sentence dictionary, on which you can find good sentences for a large number of words.

128. This system has collected fault code, data flow analysis, inspection method of ignition system and so on, the user can add, delete, alter and inquire conveniently.

129. A fuel's piloted ignition temperature is the heat level required to form a gas that will ignite when exposed to a spark.

130. Hall effect type electronic ignition control circuit has been designed by means of voltage comparator.

131. It retains its flex-fuel capability because the Saab engine management system adjusts the ignition timing and turbo boost pressure to ensure there is no pre-detonation with gasoline.

132. The ignition delay period became longer while the sustained combustion period became shorter.

133. Engine spark ignition system is the main source of electromagnetic interference on vehicle.

134. Two transient models have been developed to study the catalytic ignition in a monolithic catalytic reactor.

135. In this system the crankshaft rotating angle, where the peak combustion pressure occurs, is taken to be a feed back signal, so that the ignition timing of the engine is able to be controlled.

136. The ignition and steady combustion of fuel and combustion condition are the key factors to the combustion stability of boiler, so they determine the security and economy of boiler.

137. Flintlock:Ignition system for firearms developed in the early 16th century, it superseded the matchlock and the wheel lock.

138. "Would your car be easy to steal?" — "Fat chance. I've got a device that shuts down the gas and ignition."

139. It includes the Battery, generator, starting system, ignition system, lighting system, system, radio and other devices.

140. Match with the ignite electrode, detect electrode and gas solenoid valve to realize the burner auto. ignition and flame-out protection.

141. Through field application, the boiler ignition control system that adopts the PLC programmable controller can simplify the ignition system, and its reliability strengthens further.

142. Ningbo Tianxing Automotive Elec. Parts Factory mainly produce Starter Solenoid, Ignition Coil, Pick-up Coil and others for 18 years. All products, are exported to all over the world.

143. Flintlock: Ignition system for firearms early 16 th century, It'superseded the matchlock and the wheel lock.

144. According to the heat release rate, the reaction pathway to ignition of sample alkane is analyzed.

145. The mathematical model of arc discharge for capacitive ignition was established and simulation was made.

146. The first thing to check in the ignition system is whether spark is coming out of the plug wirer then work back from this point.

147. Therefore it is of great theoretical significance and practical value to investigate the electromagnetic compatibility (EMC) of petrolic ignition system.

148. Adjust ignition timing by gradually turning distributor housing until the timing makes are aligned.

149. So, this paper exploited a multiple times ignition system based on PC controlled LPG injection.

150. In EDM process with tool as anode, tool wear is largely produced by electron current in gap during the frist hundreds nano seconds of the spark ignition.