Random good picture Not show

151. An exact solution is presented for the axially symmetric problem of laminated closed cantilever cylindrical shell.

152. It is therefore possible to measure the form and dimension of prismatic and cylindrical parts.

153. Under high speed lightly loaded conditions, skidding damage often becomes one of the main damage forms for cylindrical roller bearings while surface roughness has great effect on skidding damage.

154. By means of fluid model and linear field theory, the dispersion equation of the electromagnetic wave propagation along a cylindrical waveguide filled with an infinitely thin annular plasma.

155. A theoretical analysis on load distribution and practical property of cylindrical roller bearing with double rib is made.

156. The optical design and optical efficiency of line focus cylindrical Fresnel lens for solar concentrator are discussed.

157. Bearing rings and washers cylindrical surface to the radial guide cage.

158. Swaging. Swaging—a tube or rod is forced inside a die and the diameter is reduced as the cylindrical object is fed.

159. Microwave transmission line model on a cylindrical wire grid is discussed.

160. It is more preferable to select tangentially polarized cylindrical transducer in applications.

161. The new whipstock system is mainly comprised of cylindrical case, localizer, spiral rotating sleeve, whipstock and deflecting tools.

162. The needle roller bearing is a cylindrical roller bearing with thin, long rolling elements.

163. This article describes the cylindrical valve's assembly and adjustment in Manwan hydraulic power plant. The cylindrical valve is flexible and reliable to operate.

164. The new running-in specifications of transmission, having the strengthening effect, was estimated by the results of strengthening under low amplitude load of single tooth bending of cylindrical gear.

165. The SC model nickel-cadmium cylindrical sealed rechargeable batteries used in power-driven tools were developed.

166. The 'hot' dispersion equation of the coaxial ridge-disk-loaded cylindrical waveguide TWT with an annular electron beam can be firstly obtained according to self-consistent field theory.

167. Comparision with the ECRM of cylindrical waveguide shows that it has some advantage and characters, especially for operating at high harmonics.

168. Nuts ellipsoid to cylindrical, ca. 2 mm long, smooth, apex beaked.

169. The one dimensional Fresnel zone phase correcting principle can be applied to a cylindrical reflector to construct a new type of point source feeding reflector.

170. A typical structure of microwave filter, i. e. rectangular waveguide inserted with cylindrical dielectric resonators has been developed.

171. T-1 (3 mm) cylindrical LED lamp. High efficiency red. Lens type water clear.

172. Measurements can be made with an infrared radiometer. Blackbody radiation at the same temperature of the object is obtained using a cylindrical direct reflection cavity.

173. Wind instruments include the piri (cylindrical oboe), taepyeongso (metal-bell shawm), daegeumsaenghwang (mouth organ) and the hun (ocarina).

174. A clothoid curve is used with its fine feature for the shape of transition section between spherical head and cylindrical shell of pressure vessel.

175. To solve the problem about the infrared radiant temperature field of a cylindrical object, the cylindrical temperature field in a two-dimensional space is studied.

176. If the objective lens is closer to the compact disk than the focal length of the object lens,[http://sentencedict.com/cylindrical.html] then the cylindrical lens creates an elliptical image on the photodetector array.

177. The decolorization of chrysophene G by Aspergillus ficuum immobilized on luffa cylindrical sponge was studied.

178. In addition, using the cylindrical tank, the purge gas mainly congregates around the rotational shaft, and swirl always occurs, which is disadvantage to the degassing of hydrogen.

179. A method of predicting the residual creep life of aluminum alloy 2A12 by using indentation test method with flat cylindrical indenters was proposed. There were four steps included in the method.

180. However, cylindrical anodes have weaknesses such as long processing cycle and poor suitability.