Random good picture Not show

91. This paper summarizes the application and the development of ion exchange resin.

92. A research is madethe production process of the high NV reactive acrylic resin by solution polymerization.

93. It puts forwards the way to substitute the rubbing resistance material from resin with the fiber cut out of highly strength cast vibrantly .

94. It both dilution, toughness, soft replacement by multi - functional epoxy resin.

95. The scrim layer may be a glass fiber or carbon fiber scrim, or veil, that has absorbed resin from the sheets of prepreg during a molding process.

96. Acetylsalicylic acid was synthesized from salicylic acid and acetic anhydride catalyzed by strong - acid cation exchange resin.

97. The self - stratifying behavior between epoxy resin and acrylic resin is investigated in different blend solvents.

98. The applications of antioxidants in alkyd resin, TDI prepolymer and TDI primer have been described.

99. It were investigated that the effects of some factors such as deblocking time, temperature, polyols and catalysts on the resin curing and its adhesive properties.

100. The pre - irradiation and co - irradiation induced cross - linking of cotton and silk with 2D resin and BTCA was studied. The electron accelerator was adopted as irradiation source.

101. Resin viscosity and surface tension are important factors influencing resin flowage.

102. They differ, however, because electroplating deposits metallic ions whereas electrocoating deposits organic resin molecules.

103. Finishing bath by the above - mentioned synthetic resin, catalyst and softening agents.

104. The precure process makes the resin cure to a certain extent, decreases resin flowability, improves resin processability significantly, and enhances the composite laminates quality.

105. PTFE gasket is manufactured by molding method with PTFE granular resin.

106. The residual mixture in the extraction process to produce fatty acid and resin from crude tall Oil which is a by-product of paper-making industry, is called tall oil pitch.

107. A composite material, e. g. a metal impregnated with lubricant or a casting impregnated with thermosetting resin, can be obtained using the inventive vacuum high pressure filling equipment.

108. This special polyolefin liquid packaging resin may replace LDPE heavyduty packaging bags and can be used for the package of all kinds of materials.

109. In vacuum epoxy resin dosing machine, measuring - valve is a very important parts.

110. Using diethanolamine as aminating agent and glacial acetic acid as neutralizing agent, aminated epoxy acrylic cationic resin was prepared.

111. The adsorption of acid , acid, propanoic acid , semantic acid on basic polysiloxane resin was studied.

112. In this paper, the synthetic method of high-ortho resol resin and influence of other chemicals ingredients on the adhesive was discussed.

113. The catalytic hydroxyethylation of liquid ammonia by cation exchange resin was studied and the reaction mechanism was discussed. According to the experimental data, the kinetic equation was deduced.

114. In this paper, the recent research advances of laccase in papermaking industry are reviewed in detail, such as bleaching, treating waster water, removing resin, enhancing wet strength etc.

115. The cure-inhibition effect of the atmospheric oxygen usually causes the surface stick of the cold-cured unsaturated polyester resin.

116. The natural properties and characteristics of shellac resin and its application in fabricating optical are descibed. Sentencedict.com

117. But, the way of making the best of disuse of woodiness is machining to wood-plastic composite (WPC) mixing with resin or plastic.

118. The tests also indicate the high dispersivity of metallic composition and long life of catalyst, thus suggest the presence of the weak interaction between metal and D3520(adsorption resin).

119. The protective coating on aluminium foils packaging for medicine was formulated with thermosetting acrylic resin, pyroxylin.

120. Silicone alkyd coating are based on either the reaction product of a silicone intermediate and an alkyd resin, or a cold blend of silicone resin and compatible alkyd resin.