Random good picture Not show

(91) The ground connection of the light current system, mainly working grounding, aims to prevent electromagnetic noise and assures the equipment to work steadily and reliably.

(92) This is why grounding allows the body to feel safe and be safe from accidents of any kind upon the physical plane.

(93) Because of series of advantage, there are a lot national power distribution network with neutral - point grounding.

(94) A synergetic theory based faulty line detection method for single-phase to ground fault occurred in small current neutral grounding system is proposed.

(95) After grounding, polarization charges and shallow charges will be released. The space charges still existing in water tree are called residual charge.

(96) This unique grounding method is named locale grounding. The locale grounding conductor is the huge pedestal of the turbine. This method also has reference value for other locale equipments in DCS.

(97) Test of vertical grounding electrode grounding resistance is conducted with impulse current generator. The effect of interference is analyzed, and the result of measurment is given.

(98) When grounding fault happens at the time when current is zero, the transient value is too small, in order to prevent it, the paper brings forward the current increment method to select faulty line.

(99) The agency said in a statement that it "is investigating the grounding and subsequent complete hull failure" of the bulk carrier cargo ship.

(100) Use for mechanical connection of different bus duct, dust-proof , splash - proof and continuity of protective grounding.

(101) Lightning protection products - XY electrical grounding products producer provincial mine Center.

(102) By analyzing the zero-sequence full current for single-phase grounding fault in isolated neutral distribution network, a new approach to determine the faulty transmission line is obtained.

(103) The effect of the rotating grounding electrode on dielectric barrier discharge is determined.

(104) Above mentioned modules are described and the principle to judge the grounding direction by use of zero sequence power component is emphatically analyzed.

(105) Connecting with exterior grounding conductor is an effective measure to decrease ground grid grounding impedance.

(106) It introduces cable grounding fault location method and analysis. It provides fast and true method for power supply enterprise to find fault point when cable is failure that is not easy to find.

(107) The isolated sensor of electricity is used in measuring the current distribution inside the grounding electrode in the electrolysis bath.

(108) The main factors which affect the earth resistance are the earth model and parameters where the grounding body is buried.

(109) The device to check if there are multi-grounding locations in transformer core and to check the grounding circuit of core and clamping pieces are introduced.

(110) The change of shield layer current wave with grounding state of external shield and core voltage with loading resistance was analyzed.

(111) The location and quantity of arrestor and impulse grounding resistance of towers has direct influence on lighting overvoltage.

(112) In order to solve these problems,(Sentencedict.com) the way of using reactance grounding is suggested.

(113) The lightning protection could be improved by means of decreasing grounding resistance of tower, installing line type surge arrester and side lightning rod as well as increasing the insulation level.

(114) A grounding continuity test shall be performed on representative design at least once per quarter.

(115) The 10 kV network neutral grounding by nonlinear resistance as a new neutral grounding mode for power system is brought forward.

(116) The movement had the grounding of anti-tradition, so it was welcomed by young students. At the same time, the tenet of the movement was adiaphorous, so it also absorbed many out-of-date scholars.

(117) A critical space condition must be satisfied between protective grounding holes, while the radius variation of grounding hole does not affect the crosstalk.

(118) Electrical property instructions of cables, including the relationship of transmission capacity (A) with the environment, grounding type, rated current, overload current.

(119) The principle, main design point and no load voltage ratio calculation method of resin insulation dry-type grounding transformer are introduced.

(120) The mechanism of secondary arc extinction by high speed grounding switches (HSGS) is analyzed.