Random good picture Not show

(91) Comparing of performance curves and cavitation property with common centrifugal pump of same specific speed was presented in this paper.

(92) The die-cast housing found on heavy-duty encoders allows the length of the shaft to be extended between bearings to allow a second encoder device or a mechanical centrifugal switch to be mounted.

(93) The test results from the centrifugal model experiments show that the granite residual soil slope will probably fail in two modes: plane failure and arc sliding.

(94) The paper introduces the mechanism of centrifugal barrel finishing processing and gives examples of its applications in the machining of artillery parts.

(95) The centrifugal pressure has an impact on the cast structure mainly because jt lowers the critical nucleation energy, raised the diffusion activation energy, which made the grains refined.

(96) The noise control of ATLS large centrifugal blower in smelter is introduced in this paper. the noise has high power, high frequency.

(97) The air- sparged hydrocyclone has been used as a centrifugal flotation device since it was invented in the 1980s.

(98) It mainly discussed the basic principle, capability characteristic and the feasibility simulation test of the new method of centrifugal graining machine for water quenching molten steel slag.

(99) The principles of centrifugal force are used in the design of centrifuge - type machines.

(100) Reed switch; Proximity sensor; Float Sensor; E-bike Brake Switch; Reed Relay; Flow Switch; Tilt Sensor Switch; Vibration Sensor Switch; Centrifugal Force Sensor Switch.

(101) A thermal spray equipment for bore surface coating based on centrifugal atomization was developed, the atomization principle and particles formation process of the equipment were introduced.

(102) In this connection, the action is similar to that previously described for volute type centrifugal compressors.

(103) These rolls can be produced by static casting or centrifugal casting.

(104) Through treatment of subsidence and centrifugal separation, the sludge became useful resources, the retrieval rate of hydrocarbons reached 94. 5%, which could be reached processing demand.

(105) The reasons of unusual axial moving in multistage centrifugal pump were analyzed.

(106) Leaf - centrifugal pump is a typical fluid machinery products.

(107) The actual output force of output weight is the resultant of centrifugal force formed by output weight and the force by reinforcement weight and amplified by step-up system.

(108) Gator Trailer Centrifugal Pumps supply large volumes of water using tractor, diesel,(www.Sentencedict.com) or electric power.

(109) The centrifugal spray drying process of eeg albumen powder was studied.

(110) The FE analysis to the rotor of a multistage centrifugal pump has been studied based on the software ANSYS. The entity model and FE model of the rotor are built for the static and modal analysis.

(111) Other washing machines, with built-in centrifugal drier, each of a dry linen capacity of 6 kg and over. but less than 8 kg.

(112) The strength calculation formula of the screw propeller under the action of centrifugal force was obtained through multivariate fitting.

(113) Then the Lagrange particle track model and the uniphase coupling method are used to simulate the gas-solid two phase flow field in the centrifugal fan.

(114) The basic setup for an airplane with a centrifugal supercharger, or compressor.

(115) A new method for damage tolerance analysis of three dimensional component under temperature and centrifugal loads is proposed in this paper.

(116) This company uses international advanced wool-making technology of centrifugal atomization to produce new style thermal insulation materials-centrifugal glass wool serial products.

(117) One of keys of production of centrifugal casting pipe of s. g. iron is continuous and fast delivery of qualified base iron with proper chemical composition and temperature.

(118) Business Scope: centrifugal fan; hot air circulation fan; axial flow fan; various furnace blower and ventilation equipment.

(119) Fourth , the centrifugal pump Here are a few important performance curve.

(120) A group of centrifugal pouring process parameters has also been provided, by which we can greatly abate the specific gravity segregation.