Random good picture Not show

61. For the oscillator of caster, the change in motor current can inflect the change in friction between billet and mould under a certain condition.

62. In the end the relationship of steel grades, mould length, drawing speed and sectional dimensions of the billet with mould taper and solidification and contraction coefficient has been discussed.

63. The spray angle affects mainly the shape of the upper transition region of the billet.

64. Therefore, some measures, such as improving the quality of tube billet and the technologies of cold-draw and annealed in process, were found out. And the good effect was obtained.

65. The article introduced the design, research, manufacture installation and the automatic control feature of Laigang shaped billet hydraulic static rolling scale.

66. Surface defect and macrostructure of high carbon steel billet were analyzed.

67. The effect of alternating magnetic field frequency on the meniscus, microstructure and element distribution of the static formed ingots of minitype square billet of 7050 aluminium alloy.

68. FIG. 3 shows the effect of billet reheat temperature and time on machinability.

69. Billet prices have also contributed to the rise in steel prices.

70. The cutted billets are further transported to the billet discharge roller table.

71. The solid billet could also be used with a spider die, porthole die or bridge die.

71. Sentencedict.com try its best to collect and create good sentences.

72. The mathematical model in heating furnace is set up for calculating billet tapping temperature according to billet heterogeneity, specification and opening rolling temperature.

73. This paper reviews the development of tube mould for billet casting at hame and abroad, and puts emphasis on the development orientation.

74. Because of the low oxygen blowing intensity, long smelting period and low billet yield, the oxygen system is rebuilt in No.

75. Burly arms folded, an expensive but unlit Cuban stogie jammed in his mouth, Morrison held and ancient billet unique to the Submarine Service, chief of the boat.

76. Breakout of molten steel in billet continuous casting occurs frequently.

77. Metals and ore: coil, steel plate, steel billet, round steel, steel angle, pipe, bauxite, coke etc.

78. The application of original position analysis is applied for quality control of low alloy steel billet.

79. The design of the aero servo aileron hinges are machined from solid billet and have a self aligning ball bearing pressed into the arm.

80. Leading products: Hot - rolled coil, High - speed wire rod, steel billet.

81. A calculation model is proposed for explosive cladding of steel billet.

82. Centerline shrinkage and segregation are the main defects of continuous casting billet.

83. It's not a billet doux which says 'Darling, you were marvellous last night', but it is a letter to a very close friend of hers in which she compares the death of someone to the death of her husband.

84. It works by placing the billet in a heavy walled container.

85. The hydraulic shear for square stainless steel billet designed by our company for caster is introduced, its type selection, structure and shear stress calculation are analyzed.

86. The billet is held in place in the die by a hold-down ring.

87. The result shows that slag inclusion in continuous casting billet cause the infolding, and the way to reduce infolding by improving the quality of billet is suggested.

88. The experiment of rolling billet verified that the theoretically calculated value is identical with measured one.

89. The application of programmable logic controller in the control system of the hot billet marking equipment was introduced.