Random good picture Not show

211. Through the positivenegative rotation of motor , the system realizes reciprocating motion and the - valve control of cylinder.

212. The drive chuck and top sub are threaded into the cylinder with right-hand threads. The drill must be alway operated with right-hand rotation.

213. The valves for the coordination of control point contact arc tooth cylinder warm drive cutters and worm parameters are presented.

213. Wish you will love sentencedict.com and make progress everyday!

214. The cylinder and the front and rear end caps are fixed and sealed by fixed screws and rubber packing rings.

215. Its tiny single cylinder engine generates just 8 horsepower, but is capable of reaching between 60 and 70 mph.

216. In a single-stage regulator, delivery pressure increASes AS cylinder pressure decays, because there is less gAS pressure exerted on the valve stem.

217. The model was employed to evaluate the equipment usability of an engine cylinder block production line.

218. This paper uses Arbitrary Lagarangian Eulerian Method to model the air motion inside the cylinder of direct injection diesel engine.

219. Actuation – can be supplied with a hammerblow handwheel, manual gear set, electric motor operator, pneumatic or hydraulic cylinder operator.

220. The line, at which the tooth intersects the graduated cylinder, is an arc in the developed surface of the cylinder.

221. The upside of cylinder is liquor field, the middle is reaction thin crystalline region and the lower part is the precipitating and separating field.

222. Each time the key opens a lock, a record is stored in both the key and the lock cylinder, creating a detailed audit report of openings and denied entries.

223. By the bucket wheel loader working device, connecting rod, rocker arm, turn fights, cylinder and lifting cylinder.

224. The Bore is the diameter of the cylinder. The stroke is the distance the piston travels from BDC (Bottom dead center ) to TDC(top dead center). The Bore is always mentioned first.

225. The fuel injector can realize homogeneity and fuel stratified injection in a cylinder, thereby improving the efficiency of the motor and environment conservation.

226. The hollow sealed cylinder body matches with the driving shaft to carry a filter plate and the filter cake adsorbed by the filter plate.

227. But the cylinder and the cylinder intersect, then bite on the generation of complex curve.

228. Based on the dynamical impingement force on the liner, the vibration response of cylinder block resulted from piston slap force was obtained by using finite element method.

229. It is not practical to fit the piston to the cylinder closely enough to prevent blow-by.

230. Mould-made paper: (1) Paper made by hand in a mould. (2) Paper made on a cylinder machine.

231. The results show that the secondary flow appears in the flow of the power-law fluid in annulus with the inner cylinder executing a planetary motion. The distribution of the secondary flow ...

232. The characteristics of steering angle, steering torque and the pressure in cylinder were analyzed when the steering wheel was held or not in the testing.

233. The impacts of cylinder gas force and damping coefficient are also discussed.

234. This paper presents a design of a new kind of hydraulic automobile clutch, namely the actuator of rotary hydraulic cylinder which is being changed from the manual driving actuator of friction clutch.

235. The flame barrier, which locates into a groove in the cylinder head, reduces the stresses on the cylinder head gasket.

236. Using particular alloyed aluminum air cylinder, the machine is tenacious, wearproof and rustless.

237. One pressure inlet, two cylinder ports providing pressure to double acting cylinder or actuator, and one or two outlets to exhaust pressure from the cylinders.

238. The cylinder gasket is an important sealing part of engine.

239. Sand washing equipment is a lot of more phyletic, commonly have ore washing machine, with cylinder sieve scrubbing machine, two-tank scrubbing machine, hydraulic ore washing sieve, etc.

240. If table index cylinder is loose, check and tighten mounting bolts.