Random good picture Not show

(241) The results are important to design combustion chamber geometry and control combustion stability.

(242) The combustion wave is divided into three zones including condensed reaction zone, dark zone and gas reaction zone.

(243) The multi-order modes of different frequencies of combustion pressure oscillation and their superimposition were studied both theoretically and experimentally.

(244) The carbon distribution was studied with the aid of particle diffusion and combustion model.

(245) A model of pyrotechnical combustion products was established based on the principle of minimum free - energy.

(246) To control air pollution it is an important engineering technique adopted at present to desulphurize by adding desulphurizer into coal combustion.

(247) The multifunctional combustion bomb is used in the simulation of the combustion process of the various engines with different fuels and different combustion mode.

(248) The technology of blast furnace gas low temperature combustion and pipe still energy-saving and discharge reduction was studied in the paper.

(249) Experiments were carried out on laboratory - scale pulverized coal combustion with different adsorbents.

(250) Experimental results show that CAI combustion is notably influenced by residual gas fraction and air-fuel ratio.

(251) The ratio of air to fuel for which perfect combustion takes place is called stoichiometry.

(252) Oxygen - enriched air increases the combustion rate of flammable and combustible materials.

(253) Numerical simulations about applying high temperature air combustion technology to rebuild a cell pit furnace were carried out.

(254) The combustion chambers of the engine are surrounded by pockets.

(255) KD can improve the burning rate of this type of propellant and can help "Pb-Cu-CB" composite combustion catalyst to enhance plateau effect of this type of propellant.

(256) A fuel stream is injected through at least one fuel injection side adjacent to the oxidant injection side in the combustion zone.

(257) By utilization of the existing boiler a horizontal combustion furnace and a burner that match have been designed for the recovery of the latent heat in the blow gas.

(258) The main and complex process in a pyrolyzer include flow, combustion,(www.Sentencedict.com) pyrolysis reaction and heat transfer.

(259) Methods:7 common-used nonmetal materials were burned in the combustion test box; and qualitative analysis was done by detective apparatus and GC-MS.

(260) Our comparison between internal combustion engines and electric engines with a battery pack shows that the storage of energy onboard vehicles is a long standing problem.

(261) Based on the thermochemistry and chemical kinetics, the combustion mechanism and flowing direction of combustion heat for the three main species of solid fuels was studied.

(262) Burning implies the combustion of other elements with oxygen to form compounds.

(263) Turbulent characteristics of different frequency band in constant volume combustion bomb can be realized by changing the structure of the perforated plate and the velocity of driving motor.

(264) Based on the design and motion parameter, the economic benefit of heat pipe transducer preheating combustion supporting gas in hot blast stoves of BF are analysed.

(265) The result was showed that the combustion characteristic of the blended coal was different with the coal quality characteristic and the blend ratio changed in the blended coal.

(266) Synopsis Application of neural network in EAF, blast - furnace, rolling and combustion is introduced.