Random good picture Not show

241. The barrel (20) is supported on means such as a trestle (11) which has roller bearings (15) to facilitate free axial rotation of the barrel.

242. To reasonably design the girder falling restrainer, the nonlinear seismic response of the restrainer was investigated considering the failure process of the bearings.

243. Particularly with Taper Roller Bearings sufficient support of bearing rings by the adjacent parts is required due to the generated internal thrust force components.

244. Discussion is also given to its application in the experimental study of dynamic characteristics of taper roller bearings.

245. Based on nonlinear relationship of the axial load and displacement of angular contact ball bearing, the experiments to load on coupled bearings are done.

246. There are many kinds of bearings and needle bearing is one of the important ones.

247. The utility model relates to a tube expander for retrusive light - duty machines with double bearings.

248. Because of heavy load and low peed of rotation, it is difficult for rock bit bearings to form a fluid ilm between the sliding surfaces, and, therefore, they may be in boundary lubrication.

249. The cutting groove machine introduced in this paper can automatically cutreentrant grooves and flanges on oilless bronze bearings.

250. For him who understands how to decipher them , armorial bearings are algebra, armorial bearings have a tongue.

250. Sentencedict.com is a sentence dictionary, on which you can find excellent sentences for a large number of words.

251. This paper is the engineering research for hydrostatic bearings on the whole-length rolls in the whole-pressing cold sheet mill.

252. The Shandong provincial quality control and inspecting center for bearings is located in the factory taking up the task of quality inspecting and arbitrament of the province's bearing products.

253. Backup and work rolls in rolling mills are frequently supported by multi-row cylindrical roller bearings as shown in Figure 1.28.

254. For example, ball and roller bearings can be of the self-aligning type to accommodate shaft misalignment and deflections .

255. Because the cages of taper roller bearings usually protrude beyond the bearing faces, special care must be taken to follow the recommended abutment dimensions.

256. Under high speed lightly loaded conditions, skidding damage often becomes one of the main damage forms for cylindrical roller bearings while surface roughness has great effect on skidding damage.

257. Due to the long term operation the rotating bearings bucket wheel machine were damaged.

258. On this particular turbocharger turbine wheel I used the inner races of two ball bearings to prevent the shaft from moving axially.

259. To facilitate their combination with needle roller and cage assemblies or the outer ring assembly of needle roller bearings, they have a lead-in at each side of the raceway.

260. Imported spindle bearings featuring in high running speed high precision.

261. The rollers of these bearings are of spherical shape, and the spherical raceway washer is selfaligned.

262. This renders the bearing like other self-aligning bearings, impervious to misalignments and shaft deflections.

263. This invention provides a kind of high starting torque squirrel cage type asynchronous elecric machine. It is composed of the stator 14, rotor, ends coverings, shaft bearings, etc.

264. Our main products include deep groove ball bearings, thrust ball bearings, wheel bearings, clutch bearings, spherical bearing.

265. The bearings are designed for very high load carrying capacity and, because they are designed with the optimum number of large barrel rollers, are also suitable for heavy loads.

266. When reassembling the generator bearings I'll send for the grease. What about the other electric machines? Will they also use your grease?

267. All bearings are on immovable supports at the same elevation.

268. It is an acknowledged world leader in rod and bar mill and also Morgoil bearings. For the time being, more than 80% rod mill and Morgoil bearings are provided by Morgan Construction Company.

269. Since encoder shafts and bearings must be engineered to have very restricted axial and radial play, using a Dynapar brand CPL Series coupling affords maximum protection against these common hazards.

270. The rear swingarm is supported on large pivot bearings, and it felt satisfyingly firm and rigid.