Random good picture Not show

1 These thrusts are an expression of compressive forces, which shorten the crust.

2 Second, resulting from thrust, dextral and compressive faults earthquakes.

3 The adhesive had good workability, high compressive strength and better bonding strength for polar materials, for example iron, and non-polar materials,(www.Sentencedict.com) for example PE.

4 Conclusion: Surgical treatment of neurovascular decompression for vascular compressive tinnitus via retrosigmoid sinus approach has positive therapeutic effect as long as the diagnosis is correct.

5 Objective To report the clinical experience of compressive titanium miniature plate and screw treatment for phalangeal fractures.

6 Conclusion:MRI is the best method to diagnose compressive myelomalacia .

7 A well suited numerical expression of the compressive stress-strain curve applicable to SFRC was put forward.

8 Tensile stress and compressive stress have different effects on the magnetic domain structure.

9 Their compressive stress-strain curves are typically three-region curves, including elastic region, collapse region and densification region. And they show signally strain rate sensitivity.

10 OBJECTIVE To investigate the effects of compressive stress on the proteoglycan synthesis of rabbit mandibular condylar chondrocytes cultured in vitro.

11 For concrete, its compressive strength, mark of resistance to impermeability and strength prior to settlement shall comply with the requirements of design and terms of construction specification.

12 Discontinuous shot-peening can lead to crack initiation at the tensile surface stresses adjacent to edges of abrupt compressive layer run outs (no fadeout).

13 The biomechanical parameters of 9 finite element models were measured under axial compressive load within physiological range.

14 Some embodiments are configured to ascertain the amount of compressive force that is being applied to the tissue while the thickness of the tissue is being determined.

15 The air outside the ball was ignored, and it was assumed that the air inside the ball behaved according to a compressive, viscous fluid-flow model.

16 Results Obtained the distortion deformation, stress nephogram, section stress of femur neck and upside of femoral shaft of the femur under the bending moment and compressive load.

17 The results shows that the lateral deformation was confined effectively and the ultimate compressive strength was increased, the ductility was improved.

18 During the ship collision and grounding, the crushing collapse of thin-walled structure subjected to compressive load is one of the important failure modes.

19 Objective: To investigate the therapeutic method of malunion of atlas and axis combined with compressive myelopathy after posterior fusion.

20 For beam specimens, there is no obvious relation between P-wave or R-wave speed to the compressive strength.

21 Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions.

22 The longer the single drill pipe , the lesser the critical compressive force of drill stem.

23 It is pointed out that the circles of thermal fatigue are ones of plastic compressive strain and elastic tensile strain.

24 It is also found that there is a close relationship between the stress in external tendon and the maximum compressive strain of the concrete flange slab.

25 The results showed that the buckling configuration was helical curve for the gravitational tubular under the axial compressive force and torque.

26 Thus, under the same bolt tension, reduce narrow smooth surface after the compressive stress will increase.

27 It is presented that the material at the transition region is the easiest region to satisfy plastic yielding conditions and produce thickness compressive strain.

28 Collapse of lumber is thought to be caused by capillary tension in those cell lumina that are fully saturated and by compressive stresses in the inner core that exceed the compressive strength.

29 With the increase of sintering temperature, the apparent porosity of sample decreases, while bulk density, hardness and compressive strength increased.

30 The relevent crack width can thus be calculated by preliminary crack width and increasing coefficient of concrete compressive strain after fatigue loading operation N times.