Random good picture Not show

91. Four row cylinder roller bearings are most widely used in rolling mill.

92. The ball bearings provide reduced running noise, longer relubrication intervals and a low starting torque.

93. Specification for bearings - airframe rolling single row, self aligning roller bearings in steel diameter series 3 and 4. Dimensions and loads.

94. The mathematic model for analyzing the dynamic loads of cylindrical roller bearings is established, and the solution method is also given in this paper.

95. The Silver - Lube bearings were installed and trials conducted over a six - month period.

96. This paper studied multi - bearings tube bearing using the transition matrix method of shipping shaft system alignment.

97. Truck wheel ends which are to be oil lubricated should also include pre-coating (dipping) the bearings in the same lubricant.

98. Bearing is one of technical cruxes in development of LH 2/LOX engine turbo pump. Breakdowns of bearings may often lead to fai1ure of engine test.

99. The specialized bearings have the performance of large load rating and compactness.

100. Slewing bearings are basic components widely used in construction machinery industry.

101. The Y - bearings supplied inside the housing units feature a spherical outer diameter.

102. This technology can be used for producing taper roller bearings.

103. IKO Needle Bearings 、 Linear Motion Products, FAG Super Precision Bearings , DAIDO Dry Bearings,[http://sentencedict.com/bearings.html] NOK Oil Seals.

104. One - way thrust ball bearings and double row cylinder roller bearings for spindle to improve rotary precision.

105. In order to partial release the internal forces, the bearing of the main trusses are designed as free sliding bearings in construction stage.

106. As a result, the bearings show a significant increase in the basic dynamic load rating and, under the same operating conditions, in the basic rating life.

107. The cap and rod have bearings which permit the crankpin to rotate freely within the rod.

108. For mounting bearings on an adapter sleeve, see the relevant pages in the sections "Self-aligning ball bearings", "Spherical roller bearings", and "CARB toroidal roller bearings".

109. In general, the cylindrical roller bearings, belonging to axial discerptible bearing, are suitable only for sustaining radial loads. The contact of roller with race is linear.

110. The axles run in two-row self aligning ball bearings on the gear side, and a standard sealed ball race on the other end in the sprung axle box, both 12mm bore.

111. This paper introduces a design process of a testing stand for aerostatic journal bearings.

112. A breakthrough for the automotive industry: Low-wear INA needle roller bearings replace plain bearings in the transmission of the legendary VW Beetle.

113. The cylinder's flat bottom allowed the ball bearings to shift out of alignment and into a less dense pack.

114. A camera is mounted in an overhang position in the pod, causing an overturning moment to be created by the unbalanced load, the angular contact bearings being particularly suited to combined loads.

115. To compute the stress of the cylindrical roller bearings under loading is a typical boundary nonlinear contact issue.

116. The motor housing encloses the armature and pole pieces, holds the bearings that support the armature shaft, and provides the terminals for connecting the motor to the rest of the staring system.

117. SRT - 03 rotary tables fitted with precision four point contact preloaded ball bearings.

118. With splIt'spherical roller bearings, the inner ring, outer ring and cage assembly are split.

119. For special applications, NKE produces spindle bearings with different cage materials such as light metal alloy cages identified by a suffix L.

120. Super-resolution spatial spectrum estimation is applied in this dissertation to realize bearing resolution by utilizing the different bearings between targets and first-order sea echoes.