Random good picture Not show

181. Methods:The viscosity of both magnetized and unmagnetized liquids was measured by using the Ubbohde's viscosimeter.

182. Particle size and viscosity are two main indexes for pseudo-boehmite.

183. The composition and viscosity properties of biodegradable two gasoline engine oils were investigated.

184. ObjectiveTo explore effects of food viscosity and sex on hyoid motion during swallowing in normal elder.

185. Viscosity: Viscosity is the crude oil in the flow caused by the internal frictional resistance, crude oil viscosity depends on temperature, pressure, dissolved gas and its chemical composition.

186. Otherwise there will be a large error between the value calculated by Stokes formula and the actual value under the condition of bigger sand grain and lower fluid viscosity.

187. The results show that polysulfide charge, temperature and time at the temperature during cooking process had an obvious effect on the pulp yield, Kappa number and viscosity.

188. For industrial drilling wellhead solidified gel ingredients, improve the viscosity.

189. In the paper, discusses a theory and ways of the glue liquid's viscosity control in the treater.

190. Both bowknot angle and dissipative angle enhance as the area of hysteresis loop increases, and attenuation enhances as viscosity coefficient of pore fluid increases.sentencedict.com

191. Conclusion: Ginseng and Strobal Injection combined with Sodium Nitroprusside could improve blood gas condition, lower blood viscosity, lower pulmonary artery pressure and improve heart function.

192. LVI lube base oil with low pour point, high viscosity and good stability can be produced by means of hydrogenation acid removal, furfural treatment and hydrotreatment.

193. Degassing : Degassing of liquid with high viscosity, such as epoxy and silicone.

194. When water glass seriflux as chemistry injection material, its kinetic viscosity is varying with time, so the process of seriflux permeating in the sand is complicated.

195. The reaction rate of non-leptonic quark weak interaction and the bulk viscosity of quark matter in the magnetic field are investigated.

196. A new multivariate linear model was proposed to associate viscosity and group composition of heavy oil. Multiple correlation coefficient of the model is 0.9885.

197. Shell Malleus comes in several viscosity grades and NLGI specifications.

198. Calculation shows that the viscosity model based on PR state equation has big error, while LBC empirical relationship can provide more accurate viscosity of acidic gas.

199. Furthermore, the controlling means of viscosity and solid content of the resin were discussed in respect of theory.

200. Conclusion Routine gastric lavage may result in decreased blood viscosity ,[sentencedict.com] posing likelihood of developing complications.

201. The viscosity properties of food thickening agent propylene glycol alginate (PGA) are studied.

202. Identification of dynamic natural frequencies and viscosity damping coefficient for a large-scale structure in practical working condition is a very difficult problem.

203. The influence of carbon black on the slurry viscosity and gelation time was studied.

204. A kind of transparent micro emulsion as cutting fluid consisted of surfactant, lubricant, antirust additive, stabilizer, mineral oil with low viscosity , biocide and water, etc. was prepared.

205. Effects of electrolyte of different kind and concentration on the viscosity, gel strength , viscoelasticity and unshrinking ability of carrageenan were studied.

206. Any test sample requiring absolute viscosity measurement under totally enclosed conditions is a viable candidate.

207. The cinder viscosity has important practical significance on the iron - smelting process.

208. Magnetorheological(MR) fluids have the properties of both viscosity and viscoplasticity.

209. Therefore it can also be applied in cosmetic, toothpaste, food, pharmaceutical industries for the research and development of new products with materials of certain viscosity(or glueyness ).

210. Unreinforced, medium high viscosity polybutylene terephthalate resin for extrusion and injection molding.