Random good picture Not show

241. Ag-Ba-O thin film is a new kind of photoemissive thin film which can be exposed to air and can be used again in a vacuum system for detecting u1trshort laser pulses.

242. Volatile compounds in tomato juice have been detected by TCT-GC-MS from the concentrate juice using the methods of nanofiltration, freeze concentration, vacuum evaporation and ultrafiltration.

243. The Condenser is constructed of AISI316L stainless steel with a condensing surface comprised of independent stainless steel coils. It is rated for full vacuum.

244. The pumping speed is predicted according to the vacuum-pumping program, and it is very instructive and meaningful for choosing the vacuum pump in the succeeding phase.

245. If the alloy is in itself sensitive to the oxygen, then not only in atomization time must take the measure, when melting should better also use the vacuum melting.

246. The RH oxygen top-blowing technology performs multi-functions such as decarbonizing, increasing temperature with Al added, cleaning slag in RH vacuum slot, etc.

247. Dilational viscoelasticity of oil-water interface film formed by vacuum residue fractions from Iranian heavy crude oil was studied by using L-B method.

248. Use vacuum bttle. vacuum bottle which is function, is good container for keeping tea.

249. The technology of vacuum aluminizing casting polypropylene ( CPP ) film and its applications to packaging were discussed.

250. The technology of vibratory stress relief(VSR) used in energy engineering, such as HT-7U nuclear fusion superconducting Tokamak massive base plate and vacuum vessel was introduced.

251. Our mail products are of nearly 200 patterns, including thermos, vacuum cups, preservative boxes, children's Canteen, coat hangers , paper tube-shaped contailners and so on .

252. This paper analyzes the common deoxidize methods of heating power, vacuum, adding medication in furnace and desorption, points out the advantages, shortcomings and usage range of every methods.

253. For arbitrary large initial data, if it is away from vacuum, the smooth solutions to the initial value problem are uniformly (namely, independent of time) away from vacuum.

254. The experimental results show that the conversion of vacuum gas oil(VGO), deasphalted oil(DAO), atmospheric resid(AR), mixed oil and topped light slurry are 74.

255. Vacuum denitrogenation and bubble carrying denitrogenation are mainly influenced by vacuum, argon stirring, oxygen and sulphur concentrations in liquid metal.

256. To know heat treatment of vacuum, carbonnitriding, carburizing and protected quenching etc.

257. The measurement of viscosity is important for the side-draw product quality of vacuum distillation column in oil refinery.

258. In this paper it is introduced the vacuum resin casting plant, VRC 3200, having importance in manufacture of dry transformers.

259. The vacuum deposition limits the thickness of solid-state batteries, which, in turn, limits their energy storage capacity.

260. The influence of the degree of vacuum on the total emissivity is discussed.

260. Sentencedict.com try its best to gather and make good sentences.

261. Objective To investigate the effects of vacuum suction on the oxygen radicals in retina of New Zealand rabbits in laser in situ kerato-mileusis(LASIK).

262. We want to buy Vacuum Cleaner, Capet Washen, Food Processor, Barbeque Grill, Kettle, Hair Dryer, Juicers , Mixers.

263. Wholly - owned New air - conditioning plant, closed shop and clean advanced vacuum Zhumo machine.

264. The mold hardness under different vacuum degree was tested. The results showed that the mold hardness of EPC process was higher than that of green sand mold and was more uniformly distributed.

265. Roger Fabian, Vacuum Technology Practical Heat Treating and Brazing , ASM International, 1993, p .41.

266. The variation of circulating water flow directly affects the vacuum of condenser efficiency of steam turbine.

267. Vacuum ultraviolet lamp ionization source is attractive for portable analytical instrument because of its smallness and simpleness.

268. The arc is obtained by applying a magneticfield coaxial with the electrode to constrict an open arc in medium vacuum.

269. aero-tuned rear spoiler: Reduces lift, creates vacuum to maximize airflow through helmet.

270. Experimental results show that Quality magnetic alloy 1JHA1 can be produced by air induction melting(AIM) and vacuum pouring technologically and economically.