Random good picture Not show

181. The relationship between heads relative displacement and sheets maximum deformation is deduced by circular function forming model.

182. The magnitude of deformation affects the performance of hydraulic torque converter and its connection with adjacent parts.

183. Polarization dispersion due to stress anisotropy and elliptical core deformation are separated by measuring their wavelength dependences.

184. The forecast result of high precision is got in forecast of foundation pit deformation by GM(1,1) model by means of selecting original data alignment and revision of residual error.

185. The element coupling shape function meatrices are derived by means of geometrically nonlinear strain displacement relation un-der small deformation assumption.

186. In this paper, each welding residual stress fields and the welding deformation simulation result of the rear fork structure were given and quantitatively analyzed.

187. The error of deformation of the blade cut by electric pulse is caused by thermal stress, morphol-ogy stress and cutting stress.

188. It is now recognized that superplasticity is a potential deformation process in ceramics.

189. Deformed granitoid plutons may be used as the regional deformation markers to study those continental deformations and to analyse the early deformations of the old continental blocks.

190. In digital geometry processing, many applications such as morphing, deformation and texture transfer etc. require a bijective mapping between two or among more models.

191. Polarization and dispersion are created due to stress anisotropy and elliptical core deformation.

192. Epicentral depositions and earthquake deformation zones provide useful information about focal region size.

193. The results show that the static softening rate increases with the increase of deformation temperature and holding time, the size of grain is bigger too.

194. Computer paper moisture contents change easy paper expansion and compression fracture deformation caused by the paper.

195. A new phenomenon of re-dissolution of second phases and re-formation of supersaturate solid solution found in processes of severe plastic deformation was summarized.

196. Coarse crystalline LC4 Aluminium Alloy presents certain superplasticity at lower deformation temperature and higher strain rate because it can create effective recrystallize refinement.

197. Thus the mechanochemistry effect remarkably occurs have to make the grinding accumulated to the certain degree, in other words, the plastic deformation happens.

198. Matrix should be of martensite , because it can resist impact and has little deformation.

199. During the half cycle of cooling, the sample tends to restore its original shape. However, because the plastic compressive deformation formed before cannot come back,(sentencedict.com) the crack opens gradually.

200. The practical analysis indicates that the deformation and stability are controlled by cataclasite structure and the effect of the structure surface far exceeds the rock block one.

201. Hardness is a measure of the resistance to localize plastic deformation.

202. The temperature of converter shell rises sharply with the utilization of MgO-C brick lining, it results in the shell permanent deformation.

203. The larger the print area, the more ink layer depth, Peel protrudent deformation.

204. One of the essential and full conditions for squeeze-forming from liquid metal in static condition is the plastic deformation.

205. The analysis of rock deformation factors should be fed back to construction operation dynamically[http://sentencedict.com/deformation.html], thus producing satisfactory results in practice.

206. The results showed that after the deformation of unrecrystallized austenite and quenching, martensite block width decreased and bent, while the packet size increased to some extent.

207. It might provide a new method for quantified study on irregular hot deformation microstructure.

208. The factors affecting dilatability of low expansion such as chemical compositions, heat treatment, plastic deformation, precipitate ph ase were analyzed.

209. Mineralization is commonly the result of full feedback coupling between the four processes of mechanical deformation, thermal transport, fluid flow, and mass transport.

210. The evolution of deformation dislocation structure during the tensile loading was examined by transmission electron microscopy in the tempered martensite of low and middle carbon alloy steels.