Random good picture Not show

31. One side of the clothes-supporting frame passes through the centre hole of the cylindrical helical torsion spring to permeate in the through holes of the big arc clip and the small arc clip.

32. Since we consider the general condition of an atom in a cylindrical waveguide, so this article gives a more dependable result in the whole spectrum scope.

33. For a steady current-carrying tightly wound thick-wall solenoid with a finite length, the expression of vector potential is derived by using the method of cylindrical function expansion.

34. The results showed that serious boiler scale caused long term overheat and creep of boiler plates which resulted in the drum shape deformation of cylindrical body of boiler.

35. Used to have tapered bore bearing installed (with locking nut and lock washer ) in a cylindrical outer surface of the shaft.

36. Non-axisymmetric problem: Two independent sets of the state vector equations are derived from its governing equations in a cylindrical coordinate system by introducing a set of auxiliary variables.

37. On the cylindrical face, a number of grinding or polishing modules (17, 18) are provided that comprise hold-back means, preferably in the shape of brushes (13).

38. IKO Card Act created four cylindrical roller world - renowned heavy rail.

39. Cylindrical roller diameter, avoid a convex degrees of stress concentration practice.

40. By using the method of the separating variable function, the transverse displacement of the shallow cylindrical reticulated shells were given under the conditions of two edges simple support.

41. Straight wheels used for surface, cylindrical, internal, and centerless grinding.

42. Two-port network modal analysis in the uniform cylindrical system has some common characters. In this paper, firstly general expressions of the coupling matrix and scattering matrix are given.

43. An efficient cylindrical clipping algorithm is presented to rapidly drill holes in polyhedrons, which are made up of convex polygons.

44. The paper introduces a rapid calculation for gear change using ordinary function calculation in hobbing cylindrical straight gears with a teeth number greater or twice than a prime number over 100.

45. Then, the classical stability theory for brail composite cylindrical shells under axial compression is discussed.

46. Measurements of the impedance of a cylindrical antenna in an isotropic plasma and a comparison with theory have been made. The length of the antenna is comparable to the free space length.

47. Then using the principles, we analyse the mutual conductances between elements on cylindrical slot conformal array antennas.

48. Also some testing results of a collimating beam expanding system, which is combined with two super-smooth Silicon cylindrical mirrors, are given.

49. To compute the stress of the cylindrical roller bearings under loading is a typical boundary nonlinear contact issue.

50. The firework rocket has a cylindrical body and a conical head.

51. Fig . 1 - 1 A, Straight ( rectangular ) tourniquets fit optimally on cylindrical limbs.

52. There are many kinds of spring in spring suspension devices, but the most used spring in rolling-stock is cylindrical spiral spring.

53. The equation governing the mean (coherent) wave in metal cylindrical waveguide is established and the equivalent dielectric constant of the media is deduced.

54. The eigenvalue problem of radially inhomogeneous cylindrical dielectric waveguides is solved by microwave network method.

55. The scatting of SH waves by a scalene triangular hill above a subsurface elastic cylindrical inclusion is investigated following the conjunction thought.

56. In this paper,[http://sentencedict.com/cylindrical.html] using the longitudinal propagating fields method the dispersion equation are derived for the fully filled chiroplasma cylindrical waveguide.

57. As the plunger surface after processing by high - precision cylindrical grinder.

58. By using of effective mobility power flow method, vibration level and radiated power level of a element cylindrical shell are studied.

59. In this paper a new grinding method, using small cylindrical face grinding wheel to grind straight outline hourglass worm, is put forward and the mathematical model is set up.

60. The main failure types of four row cylindrical roller bearings, used in rolling mills, are: fatigue flakings, cracks on the raceway surfaces, and the premature damage of cages.