Random good picture Not show

181. Compared with dissymmetrical engines, the results show that the contrapositive cam engine can balance the axial force with larger torque output and lower loads on shafting bearings.

182. This thesis mainly focuses on the effects of the shaft current of traction motor on the bearings of axle box while adopting insulated bearings in traction motors.

183. The problem of unobservability for a bearings only target tracking system is discussed in this paper based on the target traveling in the 2 dimensional space at a uniform acceleration.

184. CJ composite bearings can run in conditions of hard environment, therefore, suitable for mining machinery manufacturer.

185. The lubrication of vacuum roll-element bearings include liquid lubrication and solid lubrication.

186. Large sections of bridge deck are pushed out over the piers on rollers or teflon bearings.

187. Two passive magnetic bearings were devised to resist the attractive force between the motor coil iron core and rotor driven magnets.

188. Taper roller bearings of the series 313 are particularly adequate due to their comparatively large contact angle (approximate 30 deg), when high axial forces are to be considered.

189. A stiffness method of curved skew bridge in urban districts is proposed based on the curved grillage theory with linear radial bearings.

190. Moreover, a software module used to match the inner and outer rings of slewing ring bearings is developed based on the matching model.

190. Sentencedict.com is a sentence dictionary, on which you can find good sentences for a large number of words.

191. Self-aligning Ball Bearings are particularly suitable for applications where misalignment occurs from errors in mounting or from shaft deflection.

192. In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.

193. Single row angular contact ball bearings in spindle bearing design must not be exposed to any misalignments.

194. If using direct fire heating, care should be taken to prevent the burning of oil, the bearings should be hung in the pan, the bottom will cause overheating and reduce the hardness.

195. We are a manufacturer of SF three-layer composite oilless lubricating bearings.

196. SNL plummer block housings are designed for self-aligning ball bearings, spherical roller bearings and CARB bearings.

197. And it has bearings with high carrying capacity and combination box-shaped base.

198. Oil mist lubrication system is widely used in large, high-speed, overloaded rolling bearings.

199. This paper mainly discusses available structures of the liquid hybrid bearings and the key technologies that need to be solved for the liquid rocket engine turbopump .

200. The 9.3-inch-long aerodynamic heirloom toy, with its carnelian-core wheels, precision bearings, and stainless steel axles(sentencedict.com), is built to be passed down from generation to car-loving generation.

201. The use of a porous material as the restrictor in aero - static bearings has been well reported in the past.

202. Commercial grade, precision engineered pillow block bearings for smooth movement and tighter tolerances.

203. The high - tech bearings are permanently lubricated via an autonomous, dedicated oil reservoir.

204. Single-row and double-row full-complement cylindrical roller bearings (suffix V) are used for particularly high loads at low speeds.

205. For tapered roller large end and sliding friction between the inner wall, the speed limit is often lower than the same size cylindrical roller bearings.

206. But inside the house, one is so alone that one can lose one's bearings.

207. Normally Single Row Angular Contact Ball Bearings are used a combination of two or more bearings.

208. The construction of this ball bearing is similar to mounting two single row angular ball bearings back to back(DB).

209. In order to deal with the working temperature of journal bearings of the rock bit, we made a lot of experiments on the test bank.

210. Misalignments not exceeding 1,5 angular minutes from their centre position, usually, do not negatively affect the function of single row taper roller bearings.