Random good picture Not show

121. The melt viscosity of the cyclic oligomer is very low which is necessary to impregnate the carbon reinforcement well.

122. Aim To systematically investigate the influence of viscosity of ductile substrate on deformational features of fold-and-thrust belts.

123. In the thesis, the effect of degradation was characterized by ratio of dynamic viscosity and intrinsic.

124. The results show that the sesbania gum has better viscosity stability, size film and better adhesives to natural fiber, the better sizing effect to PVA can be replaced to some extent.

125. The carboxymethyl starch with high degree of substitution and high solution viscosity was prepared via reaction of starch with sodium chloroacetate using dry process.

126. The emulsifying viscosity - reducing experiments of Wangzhuang heavy crude oil are performed.

127. The results showed that the product had high viscosity, constant viscosity, water - absorption capacity and good anti - syneresis.

128. The process parameters controlled by CUSUM, such as intrinsic viscosity of polyester chip, end carboxy group and diethylene glycol etc, provide steady product quality and continous production.

129. The shearing stress the composite rises with increasing of shielding and so does the apparent viscosity.

130. The experiments showed that using plasticizer and viscosity reducer taken place of the solvent are feasible.

130. Wish you can benefit from our online sentence dictionary and make progress every day!

131. Gravure printing ink viscosity, is guaranteed to good delivery performance, get good prints in the industry.

132. The effects of parameters such as the gas compressibility, the liquid viscosity, surface tension, density ratio , and velocity ratio, have been considered.

133. The results showed that the solid state polycondensation improved the inherent viscosity of the chips, the viscosity fluctuation, carboxyl-end group content and water content of PET chips decreased.

134. The postponable reduced viscosity process is a thermal cracking one of shallow degree of residual oil.

135. The source item of the equations is treated by means of even energy addition model, and the disconnection in the explosion field is coped with artificial viscosity model.

136. Conclusion: Feisuqing apozem can improve the high viscosity status and correct respiratory failure of patients with acute exacerbation of COPD and respiratory failure.

137. The ROP accelerators helped increase the rate of penetration by improving the lubricity and reducing the viscosity of the mud which in turn reduced the friction of drill pipes on the wall of the hole.

138. This oil possesses characteristics of high viscosity, high flash point, low ash, low residual carbon and low evaporation loss, so as to meet the requirements of users.

139. Conclusion The blood viscosity is decreased in patients with androgenetic alopecia after treated with Yishen Decoction.

140. Ratio of poly - sulfide rubber and activated viscosity index improver to epoxy was determine and discussed.

141. The invention provides a lubricating composition containing an oil of lubricating viscosity, an oil soluble molybdenum compound, and an ashless antiwear agent.

142. The product is high in degree of substitution, whose substituent distribute equally, has characteristics of high viscosity, high content of sodium, high acid-viscosity ratio.

143. Moreover, silicane coupling agents can influenced the viscosity and rheological behavior of the polymer obviously.

144. The viscosity and thixotropy of the coating prepared with this styrene-acrylic ester emulsion were higher and the scrub resistant and waterproof were better.

145. Darcy law are found and the relationships of void ratio coefficient of viscosity and density with permeabilities are obtained as well.

146. The performances of three kinds of gels were compared by the experiments of viscosity, gel intensity, syneresis rate, adhesive power, gel freezing point as well as melting point and so on.

147. The changes of viscosity, hydrocarbon composition and average relative molecular mass of Shengli heavy oil in catalytic upgrading by oil-soluble catalyst XAGD-2 were investigated.

148. The viscosity and crystallizability of basalt melt are the most significant parameters in studying basalt fiber.

149. During pan-milling, SBS molecular chains were ruptured, intrinsic viscosity number decreased and the aberration of dispersing phase of polystyrene increased, domain size occurred.

150. OBJECTIVE:To observe the decreasing effects of Polydatin on blood viscosity and microcirculation in the rat model of acute blood stasis.