Random good picture Not show

151) With variation of shearing angles, the strength curve equation of thenardite and calcium thenardite salt rocks are deduced.

152) Action lines use a generalized move operation, where the vertices of a model are moved relative to a coordinate origin defined by one end of the action line. This allows for scaling and shearing.

153) The paper firstly put forward the energy indication of geophysical field of gas outburst in accordance with the mechanically destroyed process of gas outburst and the maximum shearing stress theory.

154) The principle of collimation is analyzed. The influence of the small wedge angle of the plane parallel plate and the lateral shearing width upon judging laser collimation are discussed.

155) The effects of toughener and filler on shearing strength and impact strength of epoxy adhesives were studied.

156) Compound discharge of the chink is the vectorial sum of shearing discharge and pressure differential discharge, but compound loss power is the algebraic sum.

157) After the crosswise cracking of the base, the bituminous pavement destruction is mainly controlled by the shearing stress.

158) The BASIC programme made out is applicable in 7 modes making regression and analysis of the shearing rate, stress and test Value of various Newtonian and non-Newtonian fluid oil.

159) The curve of metals cutting resistance established by testing the force in the process of shearing is an important parameter of rotary flying shears design.

160) Press break machine , hydrolic shearing machine and cnc sheet rolling machine.

161) The shearing machine is one of the most popular single unit equipment in the production of cold rolled steel strip.

162) The deflection is assumed to be functions of complex variables,(http://sentencedict.com/shearing.html) and then the moments and shearing forces of the plates can be obtained.

163) It is testified that the landfall happens because of the increase in shearing stress and tensile stress.

164) Rocks underwent strongly shearing deformation. The mineral deposit type belongs to the sedimentary and transform one.

165) Firstly, the maximum shearing stress envelope line was put forward to replace section line.

166) Furthermore, the relation of fabric drapability and stretching-length, flexual modulus and shearing modulus is also discussed.

167) Reasonable design of shear connector need availably control of horizontal shearing force between steel webs.

168) Mud mixing and shearing operations, desanding and desilting, degassing, supercharging, centrifugal feed, mud cooling towers, wash down.

169) For acquiring good properties of brazed joint of coal cutter, the effect of tempering temperature on microstructure and shearing strength of brazed joint was studied.

170) The shearing strength of the brazed joint can be also greatly strengthened.

171) In this paper, mathematical relationship among parameters of lateral-rotation shearing interference and possible important applications of this type of interference are discussed.

172) At last, the approach of increasing bonding strength and decreasing shearing stress is presented.

173) Combining the shearing interference technique with microscope interference technique, we proposed a shearing microscope interferometry for the measurement of surface roughness profile.

174) The Yanshanian ductile shearing resulted in further enrichment of gold and antimony.

175) According to Mechanics theory the formulary of flexural rigidity, axial rigidity, shearing rigidity are deduced.

176) Conclusion The shearing strength of joint between the prosthesis and femora would be bigger with the thinner bioactive ceramics coatings.

177) The results of the tests show that the bending and shearing is the major failure form of the stud connectors, the connectors have good ductility and have no evident yielding before failure.

178) The company has integrated flexible automation into its shearing operation—and for good reason.

179) Shearing force and sensory quality were used as the main evaluation indicators for optimizing the processing technology of tenderized dried pork slices.

180) In order to get the flat fracture without, thorn and loss of metal and keep tubes sheared from varying shape when cutting tube, the periphery shearing method with core bar is presented in this paper.