Random good picture Not show

61) The mechanism under shearing about the cross - hole voided slab is set forth.

62) The testing results about the use of new rail joint was introduced, which include the dynamic flexure stress of upper limb and lower margin of joint bar, shearing stress of horizontally neutral axis.

63) Stress shearing blanking is a combination of precise shearing blanking and stress blanking.

64) The NsAP solution has strong shearing resistance in the porous medium because of the action of its intermolecular association.

65) Hydraulic combination of punching and shearing machine ( CPSM ) is one of a typical combined machines.

66) Products: press brake machine, shearing machine, three roller bending machine, power press machine...

67) Sudden deceleration may also result in shearing injury to the intima of the aorta.

68) Hull structure of container vessel should have adequate shearing strength, buckling strength and fatigue strength.

69) At present, all internal and external technical standards adopt the concept and method of average shearing stress for engineering design. This may cause disadvantage and potential risk.

70) The new machine realized automatic control of ironing and shearing of furs.

71) Its application situation on heat shearing blade, guide plate and nodular indefinite chill roll are introduced too.

71) Sentencedict.com try its best to collect and create good sentences.

72) The main difference between resistances of subaqueous debris flows and the subaerial debris flows are the intermingling and shearing resistances acted on the surface of debris flows.

73) Aligning by light. helpful to mark out by hand for shearing.

74) At the same time, TP-1 expressed strong resisting shearing and favorable manufacture stability, it advanced the effectiveness of acidify.

75) Aligning by light , helful to mark out by hand for shearing.

76) New type compounding screw elements : very high efficiency of dispersion and compounding; adjustable shearing strength.

77) No place on earth was quite the hell a shearing shed was.

78) The influence of the small wedge angle of the plane parallel plate and the lateral shearing width upon judging laser collimation are discussed.

79) Increasing the arch thrust augments the shear stress on the surface of the shearing resistance part,(sentencedict.com) which counteracts the influence of the crushed rock.

80) In such command language, the action of shearing and cutting machine and waiting process track are dynamically simulated.

81) George Shearing appeared on the American jazz scene in the early 1940s with a series of successful recordings that featured a fine-tuned rhythm section of guitar, bass, drums and vibraphone.

82) Through closed-loop control, the shearing control standard software of the process sheet T400 can meat the special process needs of flying shear and cross shear.

83) The main products include : Q 43 series metal shearing machine , Y 81 series material baling machine.

84) The vibration-absorption mechanism of viscous shearing damper of stay cables and the optimal damping constant of cable viscous damper are analyzed in the paper.

85) The alkine and K rich volcanic rocks, which are source rocks of zeolite ores, formed in middle late Yanshanian stage, with tectonic dynamic mechanism of compression and left lateral shearing.

86) Oreshoots highly enriched in copper and gold in the deposit were actually ore mylonite formed by ductile shearing and subsequent fluid overprinting.

87) Two familiar destroy formats, bending destroy and shearing destroy, appear to RC frame columns under seism action.

88) The shearing angle is adjustable, to minimize the distortion of sheet bar.

89) A new spherometer based on self-reference laser shearing interferometric technique is described The principles and error analysis of the spherometer are given in detall.

90) Deep drawing tools, shearing knives, trimming dies, wood-working tools, hobbing tools, compression and injection mould for filled plastics.