Random good picture Not show

61. Relatively to water-soluble macromolecule (B), the ratio of polyoxyalkylene polymer (B2) can be 1-40wt%.

62. Carothers was a group leader in DuPont's Experimental Station laboratory, near Wilmington, Delaware, where most polymer research was done.

63. In our country, researching and applying the fluid loss additives began from the early days of the 1980's, the water-solubility synthetic polymer kind of which has been developed very soon especially.

64. The new notebook has a 3.06 GHz processor, a unibody architecture, and a built - in lithium polymer battery.

65. Liquid crystal polymers include thermotropic liquid crystal polymer (TLCP) and lyotropic liquid crystal (LLCP).

65. Wish you will love sentencedict.com and make progress everyday!

66. Polymer Membrane Recently, polymer membranes made from polyamides and polysulfones have taken the place of cellulose acetate, at least for ultrafiltration.

67. A water dispersion for inkjet printing, which contains water-insoluble polymer particles containing a colorant.

68. The process consists of treating the work piece with a coat that forms on the surface from the gaseous products of sublimation and decomposition of a triazine polymer reagent in a closed volume.

69. Process for homo- or copolymerization of conjugated dienes and in situ formation of polymer blends and products made thereby.

70. While ABS is molded, melted polymer can not be filled in the micro-gear cavity under any parameters group from the orthogonal list.

71. Fabrication process of polymer microlens arrays is introduced based on soft lithographic UV - molding replication method.

72. The paper modified studies the formulation of aqueous vinyl polymer solution-isocyanate adhesive(API)(sentencedict.com), which improve comprehensive operational performance .

73. The invention relates to an erasable two-photon polarized multivariate, multistage and multilayer optical storage technology based on a bisazo benzene polymer.

74. As characterized by FTIR and XRD, coordination was happened between europium and the polymer matrix.

75. By definition an exclusively difunctional monomer can only give rise to a linear polymer.

76. This paper first describes the results of a microscopic study on mechanisms of oil dis- placement by polymer solution.

77. Along with the development of polymer technology, PCMs will occur in the form of microcapsule, because of the appropriate shell of microcapsule are obtained, and the produce technology simplify.

78. The casting solution dropwise or linearly enters a coagulating bath by oscillation of a pinhead, and forms the polymer small ball or film after coagulating and shaping.

79. At least two layers of polymer film separated by frame-type bulkheads between two press plates can form a basic unit.

80. The polymer precise filtration is a new type of technology which could be used for clarification filtration and cake filtration as well as discharge of dry cake.

81. A stable microemulsion of Chinese lacquer(MECL) was prepared with a phase inversion by blending the polymer emulsions of polyvinyl formal(PVFM) and styrene-acrylate copolymer(SA).

82. Semimetal Brake Materialsconsist of reinforcing fiber, friction element, lubricate element and polymer.

83. And ethylene natural rubber and polymer materials for UV inks and finish.

84. The term condensation is now firmly entrenched in the literature of polymer science.

85. A high polymer is a very large aggregation of units.

86. Using the emulsification method, microspheres containing metamizole sodium, ciprofloxacin lactate and norfloxacin lactate were prepared, with gelatin as polymer coatingmaterials.

87. Ingredients: Deionized water, glycerin, acrylic polymer, alga extract, imidazolidinyl urea, methylparaben, HA, essence, etc.

88. The recombination of high polymer with strong antisalt and sylvite can enhance its inhibitory action on water sensitivity of mud stone and shale.

89. The result shows that the main parameters that affect deep profile consist of residual resistance coefficient, viscosity of polymer solution and amount of profile control agent.

90. Removal of these residues is essential to obtain maximum stability of the polymer.