Random good picture Not show

61. The modal testing measures the frequency call function of test points on scatter-gun and recognizes the step modal parameters by single point momentary stimulation and multi-points measuring.

62. The dynamic similarity principle of the model of Yueyang Dongting Lake Bridge is analyzed by similarity theory, and similarity ratio of modal parameters is got by modal analysis theory.

63. There are some theoretical problems in the study of generalized modal logic. Modal logic is involved with not only logical possibility but also actual possibility.

64. Particularly analyzing the applications of BOT modal in city - rail - transit in China.

65. In modal dialogs, the Cancel button means, " Abandon my input and close the dialog. "

66. There are two basic variants of palette tool behavior: modal tools and charged cursor tools.

67. The observation data of rainfall, evapotranspiration and streamflow from 1979 to 1984 and 1985 to 1987 were used to calibrate and validate the modal, respectively.

68. The transfer function matrix of combination was deduced by the theoretical method of structural dynamics and modal analysis, and identify the damping values of combination.

69. The conventional method determines the incidence angle for every ray through scanning, Its computation is abundant and needs to provide a relative precise preliminary geologic modal.

70. The working principle of the actuator was analyzed and the dynamic characteristic of the piezoelectric bimorph was studied by the FEM modal analysis.

71. The severe numerical instability in complex frequency modal mass identification from frequency response function makes it difficult to identify physical parameters.

72. Established three-dimensional model of spindle box and slide by three-dimensional software. Carried out static and modal analysis of slide.

73. Dynamic behavior of the cloth cutting machine (Model FJM102) is investigated by using the experimental modal analysis method impulsing excitation.

74. The viscoelastic damping control of steady-state harmonic response of stiffened plate is studied by using modal superposition method.

75. The influence of backlash in drive line on the modal test is discussed.

76. Modal analysis an experimental and analytic technique to analyze the dynamic performance of machines, establish the dynamic models and optimize the parameters.

77. A 3 - D solid finite element modal of a horizontal decanter centrifuge drum was established by ANSYS.

78. The properties of the operators of modal logic system S5 is investigated, then a theorem is proved about its primitive operator set, and some corollaries are given.

79. Modal parameters and vibration type were obtained by the method of least squares time domain, complex modal analysis and the experimental data.

80. At last, influences of the suit thermal resistance and impermeability index to body hot load ware analyzed with the modal built above.

81. Then,(sentencedict.com/modal.html) modal experiment of cabinet is carried out with impulse excitation method and corresponding modal parameters are obtained.

82. Can, may, might, must, should , and would are modal auxiliary.

83. Then, how contemporary logic looks upon the reduction of Aristotelian modal syllogism?

84. Are the melodies modal , tonal, or post - tonal?

85. Jung regards that archetype is an inherent and typical apperceptive modal of human.

86. The complex modal analysis method is generalized to the cases in which stiffness matrix may be singular and mass matrix, damping matrix and stiffness may be nonsymmetric.

87. However, most of the past studies have treated modality as a notion associated with the meanings of modal auxiliary verbs.

88. By combining with the modal truncation technique, the simulation formulas for proper orthogonal decomposition(POD) based on the spectral representation method were derived.

89. The damage quantification approach based on second - order modal division method is derived.

90. Established three-dimensional solid model of ball end mill , and which is imported into ANSYS software, a static analysis and modal analysis are finished with the ball end mill.