Random good picture Not show

31. The load feature of bit on cutting drum is analyzed, and the flywheel effect of shearer is discovered.

32. The flywheel on the eccentric shaft can be exchanged and connected by the distensible cover.

33. A mathematical model of the system was built based on a vector-controlled induction machine driving a flywheel.

34. The spring pivots over the fulcrum ring and its outer rim moves away from the flywheel.

35. Video 1 ( 1.4 M ) Engine accelerating with flywheel.

36. Remove the remaining converter ( or engine flywheel ) housing bolts.

37. During alterative working conditions, it is need to meet the movement requirement for original design of flywheel rapidly.

38. Members of the business community, meanwhile, describe it as the "car wheel" (referring to the rotary-shaped sun on the ROC passport) turning into a top-speed "flywheel. "

38. Sentencedict.com is a online sentence dictionary, on which you can find excellent sentences for a large number of words.

39. A new control strategy for a wind generation and flywheel energy storage combined system was proposed.

40. The design method of a flywheel with variable equivalent mass moment of inertial is presented in this paper.

41. The design methods of a flywheel with variable equivalent mass moment of inertial is presented in this paper.

42. The flywheel also has a large ring gear at its outer edge , which engages with a pinion gear on the starter motor during engine cranking .

43. With analysis on several conditions of unbalance flywheel of large press, the method of balancing on the spot and its application in Model DU1250/1600 Block Press have been presented.

44. When the clutch is applied,[Sentencedict.com] the flywheel transfers engine torque to the clutch disc.

45. In order to increase energy-storing density of flywheel, appropriate rotor material and reasonable structure should be used.

46. The method is put forward to calculate equivalent flux leakage coefficient. The validities of the study and calculation are verified by the practical magnetic suspending flywheel motor experiments.

47. Despite the ropey production values, Flywheel was a success on its own terms, attracting large audiences at an Albany multiplex and later expanding to a few regional theaters.

48. Remove tools and flywheel.

49. Taking into account the rolling load is uneven, to balance electrical loads and reduce the electrical capacity slowdown in the increase between a flywheel and electric motors.

50. A mathematical model of the system was built using a vector-controlled induction machine driving a flywheel.

51. The flywheel has a miter joint with the two end planes of the fan blade.

52. A small flywheel that regulates the speed of a spinning wheel.

53. According to filament winding process, a composite flywheel rotor laminated winding process was approved.

54. The crankshafts shown in Fig 1-4 is actually made up of various parts such as main bearing journals, rod journal, crank arm, bearing, counter balanced weight and flywheel end.

55. The second sensor is placed in the vicinity of the flywheel where a toothed wheel is mounted as a target.

56. This side will press the clutch disc facing are against the flywheel.

57. Because of its weight, the flywheel helps to smooth engine operation.

58. The brushless direct current motor (BDCM) used in attitude control and energy storage flywheel features a structure of large equivalent air-gap and large ratio of diameter to length.

59. When clutch is applied, the flywheel transfers engine torque to the clutch disc.

60. Position flywheel and O ring on crankshaft and align bolt holes.