Random good picture Not show

181. The application of the substructure method efficiently solves the combination of finite element and infinite element.

182. Then we used ANSYS finite element program to calculate the local stress in anchorage zone of the border span and analysed its local mechanical characteristic.

183. We will not be concerned with the development of a general theory of finite elasticity.

184. A coupled magnetic - circuit - fluid thermal finite element model is proposed for thermal analysis of dry - type air-core reactor.

185. Combining the nonrestrictive and nonlinear optimizing method with the finite element analysis, the optimum design can be obtained.http://sentencedict.com/finite.html

186. On Feburary 25, 1997, shandong article publishes city farming report finite liability company shingle hold water.

187. The finite time availability of a finite heat source is analyzed, and some universally applicable ficance conclusions arc obtained.

188. The energy equations of the oil film and the bush are solved simultaneously by using an efficient finite difference scheme.

189. In order to reduce the finite scanning plane truncation error in the measurements with phased array antennas, the cosine window function is introduced and applied in this case.

190. This paper develops a priority queuing model of finite units. This model not only solves some problems in the design of hardware architecture, but also is useful in studying priority queuing of fi...

191. Over a finite collection of input values, testing deals with the well defined situation of a fixed program.

192. Comparing the results of upper and lower membranes leakage test and finite element computer simulation proved that the model was correct.

193. The mathematical model and boundary condition of soil temperature field in finite region was established through analysis geometry model of underground heat oil pipeline.

194. Based on the dynamical impingement force on the liner, the vibration response of cylinder block resulted from piston slap force was obtained by using finite element method.

195. LS-DYNA, a finite element (FE) analysis software were used to build the FE model of w-beam guardrail whose posts were columniform.

196. The predicted transmission loss of perforated tube silencers using the finite element method and experimental results are compared and showed good agreement.

197. Taylor's exposition based on what we would call finite differences.

198. Furthermore, the soldering process of PCBA in the whole infrared reflow soldering stove is modeled by the finite element software, ANSYS, and is simulated by the three-dimensional modelling.