Random good picture Not show
1 We charge a flat fee/rate of $25 per hour.
2 Lower fed rates help keep mortgage rates low.
3 The grain inventories will show whether high corn prices have forced cattle ranchers and hog farmers to cut back feeding rates.
4 High - speed, high feed rate.
5 Please slow down wire feed rate.
6 The influence of laser power, scanning speed, powder feed rate, spot diameter and preheating on the temperature of molten pool were revealed in the process of single-pass cladding.
7 The process variables were screw profile, feed rate, and screw speed.
8 When velocity ( feed rate ) is not constant, several problems can result.
9 To improve the efficiency decreased by feed rate in traditional NC program, a NC program optimization system is developed for rough milling process.
10 Effects of feed rate, feed fraction,[www.Sentencedict.com] reflux ratio and feed position on reaction distillation were investigated.
11 Meanwhile the lim it of feed rate is calculated both analytically and geometrically.
12 To raise machining efficiency and make NC machine working in a perfect state, manipulator would constantly adjust feed rate and main spindle speed trim knobs in the operate panel.
13 Results of VMD experiments indicate that flux increases when feed temperature, feed rate and vacuum degree increase.
14 The distribution of chip thickness along the cutting edge is modeled as a function of tool inclination angle, nose radius, depth of cut and feed rate.
15 The influence of the factors, such as the molar ratio of acetic acid ton-butanol, the feed rate of the reactants and packing density of the catalyst, was investigated.
16 Using AC motor speed control system directly and cutting feed rate to achieve high quality cut.
17 The results of computer simulation demonstrates that it is more efficient to suppress chatter by time-varying feed rate cutting than by increasing feed rate cutting only.
18 The conditions which have an important influence on metal cutting are work material, cutting tool material, cutting tool geometry, cutting speed, feed rate, depth of cut and cutting fluid used.
19 The effects of temperature, the quantity of catalyst used, and reactant feed rate on hydrosilylation was discussed.
20 Cuttings forces increase almost linearly with depth of cut and feed rate.
21 At the same time the solution of achieving look-ahead when CNC is faced with real-time adjusting of the programmed feed rate override is built.
22 In fact, it is almost always less than the feed rate.
More similar words: speed ratio, fixed rate, discounted rate, required rate of return, fixed ratio, like a drowned rat, elevated railway, stratified random sampling, hydrate, hydrated, baud rate, quadrate, third-rate, dihydrate, third rate, dehydrate, yield rate, second-rate, forward rate, dehydrated, standard rate, hemihydrate, compound rate, hexahydrate, monohydrate, carbohydrate, hydrated lime, chloral hydrate, dehydrated food, water of hydration.