Random good picture Not show

1. Electroplating, magnesium alloy, and other anodic treatment agents.

2. Other anodic films conduct electrons.

3. The anodic oxidation of lead sulphate is well known.

4. The growing proceeding and phase composition of the anodic film on Tin-Antimony alloys in neutral solution at 1.

5. There are an anodic peak and a cathodic peak in the cyclic voltammogram of polythionine. Their peak currents increase with increasing temperature.

6. Higher the temperature, greater the anodic peak current of CV, and PANI film is more electroactive and has a higher electrochemistry ability of repositing energy on corresponding potential.

7. Well-ordered large-pore anodic aluminum oxide membranes were one-step prepared in water-deficient electrolytes using ethanol as main solvent.

8. The preparation of porous anodic alumina film is studied with sulfuric acid as electrolyte and the morphology of the film is characterized by field-emission scanning electron microscope(FE-SEM).

9. By means of non-linear regression method calculated the anodic kinetics parameters. The mechanism of anode reaction and its rate-determining step were discussed.

10. Soft lithography and anodic process were combined to prepare the pattern porous alumina successfully.

11. Furthermore, the emulsion technology used in anodic cyanation is discussed in detail.

12. The anodic polarization current increases rapidly and the anodic process is out of control because of plenty dis-adsorption of corrosion inhibitors when anodic polarization voltage exceeds-0.45V.

13. Magnesium tank saver - provides anodic protection against corrosion of the tank due to electrolysis.

14. This article discussed anodic oxidation mechanism of aluminium plate by means of electrode potential, Nernst equation, overpotential and so on.

15. Some technical problems concerning the analysis of barrier anodic films on aluminium by AES were discussed.

16. This paper introduces an improved porcelainous anodic oxidation and analyzes the effect of different process parameters on quality of oxide films.

17. The addition of SO2 promoted the anodic process of corrosion of X70 steel, increasing of the acidity and temperature of the solution promoted the cathodic process mostly.

18. The choice of anodic materials depends on high efficiency, reliability and electrocatalysis for the electrochemical destruction of organic compounds.

19. The influence of temperature on the anodic process of seawater electrolysis are discussed.

20. Anodic voltage - drop of prebaked anode aluminum electrolysis cell was around seized of 10 % of cell voltage.

21. Trace metal ions in the solution are thereby reduced and plated on to the anodic electrode.

22. The potentiostat is one of the principal instruments used to control an anodic dissolution process accurately in electrochemical experiments.

23. Results showed that both types of imidazoline derivative inhibitors were mix-type inhibitors which mainly inhibited anodic processes.

24. The results showed that the coating grew by the following steps : the stage of anodic deposition, micro-arc oxidation and local arc light.

25. It comes to the conclusion that the corrosion fatigue fracture of LC4 aluminum alloy is the results of combined action of anodic dissolution, hydrogen embitterment (HE) and mechanical damage.

26. Diethylene Triamine Penta Methylene Phosphonic Acid (DTPMP) is applied to hydration resistance treatment of anodic oxide films, which treating method is same as that of ATMP.

27. The results indicate that sodium benzoate, ammonium benzoate, cinnamic acid inhibited anodic process significantly.sentencedict .com

28. The fracture modes were ductile dimpled tearing fracture for the aluminum brass at the corrosion potential while intergranular for the aluminum bronze at various anodic potentials.

29. Addition of heavy metal thallium, bismuth, silver, mercury and lead will greatly widen potential zone of activation dissolution of gold and significantly improve the anodic current density.

30. Sn naowire arrays were AC electrodeposited into the pores of anodic aluminum oxide template.