Random good picture Not show

1. A rolling guide device (160) has a raceway rail (161) as a railway member and has a mobile body (163) movably installed on the raceway rail (161) with balls (162) in between.

2. The blast furnace raceway formation under the intensive coal injection by measurement of micro wave reflection gunned through a tuyere is discussed.

3. As contrasted with the raceway control assumption, the new method can be applicable to any speed and is relative reasonable because it is based on mechanical analysis.

4. Profile of tuyere raceway is greatly affecting the airflow at the bottom of BF , activity falling.

5. Raceway - based feed - in and feed - out device, reduce labor intensity.

6. Figure 4. Raceway damage - caused when shaft currents damage the ball bearings - shows as a corrugated ball race.

7. Inner raceway grinding is more difficult in bearing ring production.

8. Based on the dynamics and raceway control theory of the rolling bearing, the dynamic model of angular contact ball bearing was set up with consideration of the pretension.

9. Temperature distribution of blast furnace raceway was measured and studied with an infra - red thermal image system.

10. While the grinding allowance of inner diameter, inner raceway outer diameter and outer raceway was reduced, the quality and the economic effect were increased.

11. Hammond responded to a call to remove a female bobcat from Tucson Raceway Park.

12. When grinding the bearing ring, the outside diameter of it was taken as locating datum to process the outer raceway with the assistance of electromagnetic centerless clamper.

13. LARGE INSIDE DIAMETER : The large end of the cup raceway.

14. Spherical roller thrust bearings are deigned in such way that their rollers are spherical shape, and the raceway surface of housing washer is also spherical, so these borings woo self-oligned.

15. The roller of these bearings are of spherical shape, and the spherical raceway washer is selfaligned.

16. It is compositive still transistor of two in - house low saturated PNP double raceway groove charges function.

17. The main failure types of four row cylindrical roller bearings, used in rolling mills, are: fatigue flakings, cracks on the raceway surfaces, and the premature damage of cages.

18. The operational clearance for needle roller bearing assemblies, without inner rings, which run directly onto the shaft is determined by the tolerance field selected for an "actual" raceway.

19. For needle roller bearings without inner ring, a suitable internal clearance is achieved by selecting the appropriate tolerance for the raceway diameter.

20. Geometric accuracy and semblance quality were required seriously during grinding outer ring raceway and rib of bearing synchronistically, common corindon grinding wheel was not very effective.

21. Like self-aligning ball bearings and spherical roller bearings, they are provided with a spherical outer-ring raceway.

22. This type is constructed with the inner ring and ball assembly contained within an outer ring which has a spherical raceway for self aligning.

23. Then out of the steering of the design strength check, mainly steel ball and the raceway contact stress, bending stress and tooth fan rocker shaft diameter determined.

23. Sentencedict.com is a online sentence dictionary, on which you can find good sentences for a large number of words.

24. The rotating side seal member (9) further comprises a slinger (31) fixedly fitted to a wheel side raceway track member (4) and a pulsar (10) fixed to the slinger (31).

25. It also deals with the change of coke property and the raceway before the tuyere bounded by lump coke.

26. The work is fundamental for the mathematical modelling of pulverized coal combustion , such as in the blowpipe prior to the raceway of blast furnace, by Vorticity and Stream Function...

27. Compete on over 20 tracks including Eldora, Dodge City, Williams Grove and world-famous Knoxville Raceway.

28. With the same center as the bearing, the spherically formed outer ring raceway can mad self - alignment.

29. Zhuhai International Circuit. From the top, you can view the whole raceway, of course also the beautiful scenery.

30. SHOULDER : Defect found on rib or outer diameter; a raised edge on rib face caused by grinding wheel; raised surface at either end of outer diameter raceway.