Random good picture Not show

61. To the functions of the over - lay apparatus the straightener the traction grooved pulley and the take - up.

62. The pulley moves in straight line along the I - shape steel and rotates alongswing arm.

63. Put pulley and rotor of the centrifugal together and made full use of magnetic field, the centrifugal permanent-magnet direct-current generator reduces the cost.

64. By crampon, lifting beam and pulley block as well as hoisting and mounting the bridge crane in parts,[www.Sentencedict.com] ensures safety and economy for the construction.

65. Has specialized length rocking shaft, plate pulley and single-seat photograph elevating gear and so on urgently need equipments, they can supply the photography movie, the television, MTV.

66. The weights are moved via a cable and pulley system.

67. With the test amplitude of vibration, the actual impact factor of pulley drive is determined.

68. Answer: the first to assay the following fe content, if iron content high, can use magnetic pulley cast the tail.

69. The skillful design of the pulley block makes the largest door leaf able to bear the 400kg dead load of the leaf.

70. Pulley bearings are frictionless.

71. Watch the propulsion ram and the attached rope pulley in action as the car ascends.

72. Younger teens then yank the rocks up with a pulley.

73. Numerical simulation of rolling process of an automobile air conditioner V -belt pulley has been studied by use of DEFORM software.

74. A pulley or a system of pulleys set in a casing.

75. Tap-Lock Timing BELT pulley with Taper-Lock Bushing is easy on and off, it can be used on variable hubs due to Taper-Lock bushing Bushing bores.

76. Constriction and self tightening function of V belt pulley is demonstrated in this paper.

77. The individual strands of each cable were hung in pulley blocks.

78. Pulleys are on the market that permit an adjustment in the width of the groove. The effective pitch diameter of the pulley is thus varied, and moderate changes in the speed ratio can be secured.

79. Turn of belt pulley to regulate graduated dial and pressthe one button to change needle gauge.

80. The forward pulley is large and is generally made from an in-line skate wheel.

81. A motor shaft gap used for a sealing plate for a seal air channel is left between the belt pulley and the end cover of the motor shell.

82. The dynamic force of the motor is transmitted to a cutter through a belt pulley, a separator and the driving flexible shaft.

83. A prototypical serpentine belt drive system, which includes two pulleys, one tensioner and belt, is taken as an example, and slip rate between driven pulley and belt is measured and calculated.

84. The company owns the most advanced hold in range, solid pulley productive equipments and various detecting instruments in nation.

85. The tower type belt driven long stroke pumping unit is composed of the crank-linkage-slide mechanism, movable pulley-narrow belt-fixed pulley mechanism and compound drum stroke-increment mechanism.

86. To finish this Seat Tube assembly we need to make provisions for the chain pulley mount.

87. When the belts have been located in the belt pulley grooves, moves the drive motor away from the driven shaft so that uniform teensioning of the belts is achieved.

88. In the mini-motorcycle multi-way for the latter with a belt drive transmission, primary, secondary driven pulley reduction ratio of the size of the decision.

89. Control the fabric feeding tension by adjusting the speed of fore guiding roller and rear guiding roller through exchange chain pulley.

90. When a belt pulley is adopted to transmit. the axis central line of motor should be parallel to load central line and be vertical with belt central line.