Random good picture Not show

31. Generally, oxygen or hydrogen peroxide, as leaching oxidant, and sodium chloride solution , as elutriant of saturated resin, have been applied to in-situ leach of uranium so far.

32. Plate load test (PLT) is a kind of in-situ test method used to measure pressure-deformation characteristic of ground soil.

33. A target chamber for ion implantation and in-situ electrical measurement at temperatures variable between 77-800K is presented.

34. Disordered structure and local bend phenomena in front of crack tip in molecular dynamics simulation accord with the results of in-situ TEM observation.

35. Methods: The number of X and Y chromosomes of the ejaculated spermatozoa from the patient with mosaic 46, XY/47, XXY was analysed by X/Y dual fluorescence in-situ hybridization(FISH).

36. These systems can not only dimerize ethylene but also simultaneously copolymerize ethylene with the in-situ formed dimer, 1-butylene, to directly produce LLDPE.

37. After deactivation due to coking, catalyst could be regenerated by in-situ regeneration so as to reduce producing cost.

38. Probed into a new method to measure in-situ stress-core deformation method, which depends on measuring the variation of core diameter.

39. LASIK (laser in-situ keratomileusis) is the most common laser surgery for correcting nearsightedness (myopia) and astigmatism.

40. An in-situ test is used to investigate the mechanical behavior of mucky ground of subway in Guangzhou.Sentence dictionary

41. The microcomposites of aromatic-aliphatic copolyamide with polysulfone (PAA/PSF) were synthesized by in-situ polycondensation.

42. A new method of monitoring the in-situ extremely low residual reflectivity of antireflection (AR) coating of travelling-wave semiconductor laser amplifier (TW-SLA) is presented.

43. The hydrogenator has been successfully used in the in-situ diffraction experiments on several deuterides.

44. The adsorption and orientation of benzene and benzenesulfonic acid on platinum electrode surface were studied using cyclic voltammetry and in-situ reflection-absorption spectroscopy.

45. Rayleigh wave method is a jumped-up and effective in-situ test.

46. Microcapsules of Phthalocyanine Green G with urea-formaldehyde resin wall were prepared by in-situ condensation polymerization reaction with acid catalyzer.

47. To solve strata pressure control of shallow coal seam with thick sand and thin bedrock, in-situ observation was carried out in Baoshan mine 6101 fully mechanized coalface, which is the first coalface.

48. With the offset data obtained by in-situ construction method monitoring, the mechanical feature parameters of surrounding rock are obtained with optimal back-analysis method.

49. The calculated load-settlement curve and that obtained from in-situ test are in good agreement, which verifies the model.

50. With the contrast to the results of in-situ measurement, the rationality of the iterative incremental method is demonstrated.

51. Microcapsules loaded with tetradecane as the core material are prepared by in-situ polymerization methods.

52. Finally, the limit cohesion strength between the soil and the nail was obtained by in-situ test, and the results were also compared with those regulated by the technical specification.

53. An in-situ test of large industrial water primps characteristics, which is a combination of thermodynamical method and motor shaft power measurement, is described in this paper.

54. The crystallization behavior of rare-earth luminous polycaprolactam(PA6) prepared through in-situ polymerization was investigated by DSC.

55. It is, therefore, of academical and practical importance to investigate and to clarify the electrical fatigue mechanism of ferroelectrics by using on-line or in-situ technologies.

56. The function of compatibilizer on in-situ composite material and species of compatibilizer in in-situ composite systems was reviewed.

57. It was considered that early stage diagnosis, in-situ inspection and microcomputer processing, as well as network based remote testing and evaluation were the trend of development.

58. In this paper, reactive extrusion was used to prepare flame retardant PA6 with in-situ formed melamine cyanurate(MCA) from reaction of melamine and cyanuric acid carried out in twin-screw extruder.

59. By means of the technique of microcircuit integrated on DAC, the resistances of graphite like C3N4 were in-situ measured under high pressures.

60. In order to manufacture conductive paper, aniline was polymerized into the micro-pore wall of the pulp fiber by in-situ adsorption polymerization process using ammonium persulfate as oxidant.