Similar words: headstone, headstall, headstand, dead stop, headstart, head start, lead story, headstrong. Meaning: n. the stationary support in a machine or power tool that supports and drives a revolving part (as a chuck or the spindle on a lathe).
Random good picture Not show
1 The diminutive size of the headstock suits the overall slender appearance of this guitar perfectly.
2 Inlaid into the front of the black-faced headstock is the familiar Gibson logo, and what looks like a stylised seahorse.
3 The large headstock, with its shallow pitch, looks quite in keeping and the mini-Schaller machineheads help lend an up-market air.
4 The headstock is of course the early Precision shape, a direct enlargement of the Telecaster guitar's.
5 And the body and headstock binding is simple white plastic, to avoid detracting from the overall look.
6 Headstock gears ground with low noise.
7 Cock and ball 2.3.3 : headstock were plunger or ball, rotating around its own axis.
8 Tailstock. Compared to the headstock, it seems simple. The back seat has nothing special. The vent-pipe told me: this is a motor bike.
9 Many problems are existed in quality control of headstock gear.
10 The compound bearing installed between headstock and bearing seat does need any lubrication. No wearing.
11 Noise in the headstock box of horizontal boring machine was found mainly from this impact.
12 Clutch in headstock makes the lathe start smoothly and brake quickly.
13 Radial Arm is the part on which the headstock is mounted.
14 It can control degree of the headstock of valve directly through travel indicator.
15 Allen key truss rod adjustment is located on the familiar,(www.Sentencedict.com) Fenderish headstock with its circular string retainer and elephant ear machineheads.
16 Finally, a pleasantly-grained veneer of dark ash has been used as a finish on the front and back of the headstock.
17 I was almost tempted to tie an old-fashioned strap around the headstock to alleviate the problem.
18 This form of serial numbering is still used today on guitars where the number is impressed into the back of the headstock.
19 Consequently any stop motion must be sited in such a way as to allow sufficient time for any stop to occur before the broken end reaches the headstock .
20 The most common form of lathe is the turret lathe it consists of a horizontal bed supporting the headstock, the carriage and the turret.
21 The paper concludes that noise pressure level emitted from the headstock of a lathe is closely related to its idle running Empirical formula has been derived for calculating machine noise.
22 A maple, satin finished C-shaped neck with rosewood fingerboard provide warm tone, a solid feel, and great mid-range. Tilted headstock with chrome die cast tuning machines.
23 At the end of the analysis, it is suggested that exerting the elastic and damping restriction on the afterbody of the headstock was the best reasonable measurement.
24 The spindle is driven through the gearbox, which is housed within the headstock.
25 The point is that there is a Heat Constant when testing the heat of the headstock.
26 Off penetrable knife gate valve is a new type of fast-flow regulating valve with both ends opened and closed operation of actuators that can double increase headstock speed .
27 Transmission case is a key part in the drive system of the vertical lift platform mill machine, which unity headstock, feed change gearbox and other parts and maintain their right position.
28 The horizontal bed is the foundation member which supports the headstock , tailstock, and carriage.
More similar words: headstone, headstall, headstand, dead stop, headstart, head start, lead story, headstrong, feedstock, bloodstock, listed stock, standard stock, preferred stock, convertible preferred stock, gladstone, toadstool, loadstone, heads, Heads up, heads-up, lock stock and barrel, headset, headshot, headship, headspace, overheads, headscarf, stock, headspring, stocky.