Random good picture Not show

1. The flange around the wheels on railway trains helps to keep them on the rails.

2. Although I have seen flanges in several places, nowhere are they more spectacular than on the Juan de Fuca Ridge.

3. When you work a flange, you park the sub right in front of it.

4. Hot water pools beneath these flanges, creating unique hazards for a pilot ascending the structure.

5. Its flange uses the bolt joint.

6. Rugged die cast aluminum flange and cover.

7. Professional flange designed to remove dirt floor and walls.

8. Remove cover and clean flange and reseal.

9. Press the flange and replace the side sealing ring.

10. It is composed of casing flange, casing cross joint, wellhead valves, tubing hanger, tubing head cross joint and accessories.

11. Lug body available with ISO flange dimensions and metric bolt hole threads.

12. Please give clear indication of flange, material and operating pressure if you need other standard.

13. In the production, may be used combined flange for easy demoulding and mould rotating mechanism for raising glass fabric spreading quality and reducing labour intensity.

14. Angle Flange Standard. Flat Flange: Specify hole pat-tern. If no drawing provided, flange will be blank.

14. Sentencedict.com is a sentence dictionary, on which you can find nice sentences for a large number of words.

15. When the flange width is large, the ultimate capacity of the members increases firstly and then decreases with the increase of positive and negative eccentricity.

16. These should fit into the well of the recessed window and have a flange which overlaps the edge of the well.

17. The bus had two sets of wheels, one with conventional tyres and another set of iron wheels with flanges.

18. Made from flexible synthetic compound that won't support bacterial growth, its self-sealing flanges grip the insides of almost any cistern.

19. Most replacement doors are fastened to the framing by nailing through a flange at the top and sides with 2-inch roofing nails.

20. The thing - it must have been five metres across - rippled its flanges invitingly and eased right to where we stood.

21. A tire tool or flat stock can be used to pry one part of the bead up over the rim flange (start near the valve stem).

22. Lode parameters are used to analyze the stress and the strain of the flange in calendering.

23. The contraction of the buccinator limits not so much the height as the width of the buccal flange.

24. Through the analysis forging defect structure, the main reason causing fold defects of the die flange yoke was the metal refluence by the wrong size of forging deformation.

25. After adjusting and installing with the spring balance bring 20 - 40N (as illustrated in figure 3) to bear on bolt hole in the small gear hub, the flange should be able to turn.

26. Relay. Coil voltage 6 VDC. Contact arrangement 2C . Terminal PCB. Enclosure top flange. Option neon lamp.

27. To reduce the cost and lead time of developing a trimming die, a method to obtain the trimming line in flange process is proposed on the basis of blank grid deformation.

28. The gear reducer is aligned based on 4 mark lines on sides of bottom flange and bedplate marks.

29. A tire tool or flat stock can be used to pry one part of the bead up over the rim flange.

30. It is also found that there is a close relationship between the stress in external tendon and the maximum compressive strain of the concrete flange slab.