Random good picture Not show

1. The pilot was saved by the ejector seat.

2. The pilot was saved by his ejector seat ... and by smashing through a greenhouse full of tomato plants.

3. The utility model provides a spontoon type ejector.

4. Next is actuation of the ejector plate.

5. Hide the ejector seat levers.

6. Does this an ejector pin or an ejector bar? Can we add an ejector blade?

7. Each ejector pin diameter has a number of different lengths associated with it.

8. By optimizing ejector combustor geometry, ejector rocket in SMC combustion mode can obtain comparable thrust augmentation.

9. The ejection mechanism used pin ejector to pull the plastic parts out with move slanting slide simultaneously leaving circular arc concave position. The ejection mechanism is simple and practical.

10. Does this part need an ejector pin or bar ? Can we add an ejector blade?

11. Introduced the injection gate, parting surface choose, ejector mechanism, mold structure design and mold working principle.

12. Since some components such as ejector pin, locating ring , sprue bush , water junctions and springs are not included in the mould base, these components are purchased independently.

13. Some suction is provided by the ejector scrubber and the tail gas fan.

13. Sentencedict.com is a online sentence dictionary, on which you can find good sentences for a large number of words.

14. Alternatively the ejector rod may be coupled directly to the hydraulic ram so that forward and rearward movement of the ejection System may be achieved.

15. The ejector plate assembly's movement effectively withdraws the central mandrel from the collapsible sleeve thereby causing it to contract in diameter.

16. The shedder is suitable for drafting bottles of different specifications through changing draft ejector plate and adjusting the original position of the plate.

17. Introducting a gear billet forming die carrier structure used on friction press for no fash forming discusses die carrier guide , ejector pins and main elements selection of materials, heat treatment.

18. The attachment region need not cover any portion of an inner surface of the fluid ejector.

19. Because you'll release this section of the roof and engage and fire the passenger ejector seat.

20. A foot valve must always be fitted to the end of the ejector suction tube.

21. The essential performance had been achieved by testing through changing boundary layer ejector pumping capacity, mixing chamber clapboard length, the counterpressure, main inlet mass flux and so on.

22. From the experimental results the effects of nozzle axial position and mixer tube length upon ejector characteristic are revealed .

23. At present, the phenomenon of axial desquamation for an individual ejector pin plate or an annular cutter can occurs in a disposable digestive tract anastomat component.

24. A particular injection mould with submarine gate and two-stage pushing out plastics by cavity plate and ejector pin for thin disk is designed.

25. The research tries to work out a new type vacuum ejector, which can reduce the compressed air consumption by means of reducing the area of Laval nozzle.

26. A precursor of the non-wetting monolayer may include a thiol termination, the attachment region may include gold atoms, and the outer surface of the fluid ejector may include silicon atoms.

27. The forming technology of the cell phone piece was analyzed. The structure of the mould was redesigned to improve the strength of the thin slanted ejector pin.

28. The non - wetting monolayer may not cover any portion of an inner surface of the fluid ejector.

29. The product has excellent tooling quality and machining performance, so as to alleviate and avoid the deformation of ejector pin because of heat treatment.

30. After mold opening, this pin will function as an ejector pin and ejects the sprue from a sprue bush. Also it releases gas contained in molten plastic.