Random good picture Not show

121. Separation media guide magnets used stainless steel wool and stainless steel net Magnetic two.

122. The influence of negative pulse voltage applied directly to stainless steel samples on plasma characteristics has been found to be negligible, except sample sputtering.

123. Tumbling, dull polishing, mirror polishing, electrolytic polishing, and passivation treatment for the stainless steel castings.

124. The material quality is ASTM A 743 M ( ZG 00 Cr 13 Ni 4 Mo ) the austenite stainless steel.

124. Sentencedict.com try its best to collect and create good sentences.

125. Spraying a layer of carbon coating on the coating surface of martensitic stainless steel could be benefit to the tin soldering's reliability of coating.

126. This done at either the stainless steel mill or at the stainless steel processor.

127. The blue sandstone face contrast the stainless steel filigree and case.

128. The cotter pin is stainless, the other parts are hot-dip galvanized steel.

129. Stainless steel is adopted as material for nozzles, inner or outer or side cooling rings, each of which is equipped with pressure indicator and flowrate adjusting valve.

130. We will need to source a stainless steel factory that has enamel capabilities in China.

131. Test solution— Place each Tablet in a specially made quadrangular basket of stainless steel wire gauze, soldered in one of its upper, narrow sides to the end of a steel rod (see Figure 1).

132. The stem and packing gland are also stainless steel for corrosion protection.

133. The chemical composition of stainless steel thin plats was determinated rapidly by direct reading spectrometer after optimizing analytic parameters. The accuracy and precision of the results are high.

134. The work chamber adopt the mirror-surface stainless steel, four-square semi-circle arc, which is easy for cleaning. The distance between shelves is adjustable.

135. We also supply pickling line, Degreasing line, Annealing furnace for stainless steel.

136. The unit is consisted of a stainless steel heat coil made of stainless steel sheath bonded with stainless steel fins encase in an IP44/IP56 stainless steel enclosure.

137. One or more roughing tools and a finishing tool are usually required for each job. Tools made of cold-rolled steel or stainless steel provide the best wear ratios.

138. The working table is made of stainless steel by totally enclosed type that will be easily operated and not be damaged.

139. The new design machine use the new clamp which is made of stainless steel and special steel,[Sentencedict.com] it is legerity and convenient.

140. It is also a good helper for cleaning in the areas of modern city environment protection, ads company, bus company, telecom system, mines factories, stainless steel company etc.

141. An electromagnetic shielding material was prepared by adding stainless steel fiber into LDPE.

142. The principle for the oil-quenching and tempering technology of two high chromium martensitic stainless steels is introduced.

143. Black doorcase does not see more, the entrance door with outer stainless steel is added inserted every bits of bit fashionable breath.

144. The results show that the efficiency of stainless steel flakes and glass flakes to improve the cathodic disbondment was better than that of mica powder.

145. We installed a stainless steel towel rail on the wall.

146. Stainless steel rubber rings, earrings, pendants, bracelets and die, wire rings, earrings, pendants, bracelets, please call letters negotiations.

147. In welding test of TCS stainless steel, it was found that impact absorbing energy of heat-affected zone(HAZ)near bond line in welded joint was low. The reason is coarse grain in HAZ.

148. Material: high quality low carbon steel wire, stainless steel wire, aluminum alloy wire, PVC wire.

149. To be seasoned with the specification of process piping with defer structure, It is frequently to use stainless steel bending elbow for the equipment of petrochemical industry.

150. Stainless steel composite strips were made by using inversion casting method and then rolled. The differences of the microstructures and shear strength were studied.