Random good picture Not show

1. All received the standard semisolid test meal.

2. The solidification modes of liquid phase of semi-solid AZ91D Mg alloy were in close relationship with the degree of supercooling determined by cooling rate.

3. Semi-solid metal technology is characterized by many advantages and believed as the key metal manufacture technology in 21 century by specialist.

4. Introduced the new die casting process such as semi-solid die casting, solid die casting, vacuum die casting etc.

5. Semi-solid metal processing is a new net-shape forming technology, in which complex shape close to cast parts and high mechanical properties close to forge piece can be obtained.

6. The turps in the jar has congealed to a semi-solid jelly around the brushes.

7. According to the plastic injection and hot chamber die-casting mould, a suit of mould of magnesium alloy semi-solid injection is designed.

8. By means of reheating experiments and metalloscope, microstructure evolution of AZ91D magnesium alloy extruded by an equal channel angular die is investigated in semi-solid state.

9. This paper researched the refining and spheroidization mechanics of the semi-solid grains of AZ91D magnesium alloys by SIMA.

10. Along the way, you'll find stones of knowledge that let you learn new skills like Jellify Water, which turns raging streams semi-solid.

11. The corresponding calculating program was written by MATLAB to calculate the fractal dimensions of box-counting in the morphology imagine of semi-solid primary phase in A356 alloy.

11. Wish you can benefit from sentencedict.com and make progress everyday!

12. The numerical technique is applied to simulate die casting process of semi-solid AZ91D magnesium alloy.

13. In comparison with conventional electromagnetic stirring, A-EMS can produce a finer and more uniform semi-solid structure with the average grain size decreased by 31% under the same stirring power.

14. The influence of rotating speed of centrifugal casting machine on the semi-solid microstructure of Al-Si alloy was researched.

15. The main failure forms, such as thermal fatigue crack and thermal ablation of die of axle box body by semi-solid squeezing forming of B grade steel were presented based on lots of experiments.

16. The present status of the research of Mg alloy semi-solid processing from three aspects including the preparation of non-dendritic structure, reheating and semi-solid processing were described.

17. Computer simulation was employed to optimize filling system to predict filling process and prevent the defects for Al alloy automotive parts in semi-solid die casting.

18. At the same time, the improvement of die and shotting system is also discussed. General flow chart of choosing die-casting machine for semi-solid processing is given.

19. Semi-solid slurry of hypoeutectic high Cr cast iron was prepared by inclined cooling plate method. The condition and rule of semi-solid globular crystal formation of the cast iron were studied.

20. Nor are all of Google’s products even guaranteed to ship, being as they are in that semi-solid technical state called beta test and subject to cancellation on a whim.

21. Its family " basswood original honey" especially good, is the semi-solid, places one to model in the feeding trough.

22. The effects of strain rate and engineering strain on liquid phase segregation in the process of semi-solid metal forming have been revealed in this paper.

23. Both dendritic structure and high strain rate enhance the deformation stress of the semi-solid alloy, and enable the stress to increase with strain continuously.

24. The progress of die casting technology of magnesium alloys, such as semi-solid die casting, vacuum die casting etc.