Random good picture Not show

91 It set up a dynamical model of the robot and analyzed its dynamics, deduced out the relative model between stiffness of flexible hinges and micro moving velocity of the robot.

92 A new deformable arm using micro actuation technology is introduced here.

93 Besides, the principle of ruling radial gratings with arbitrary equal spaces by the help of the circular dividing machine controled by a single-board micro processor is also explained briefly.

94 The paper puts forward a cylindrical staggered - sheet structure micro linear stepping motor.

95 A new micro - controller based compensation method for remnant - voltage of the GMR eddy current probe was analyzed.

96 The recuperator is one of the main components of the micro turbine in energy island system.

97 The performance of the micro chemical reactor was evaluated by the mixing-reaction experiments of sodium hydroxide solution with phenolphthalein solution.

98 Dusty plasmas consist of electrons,(www.Sentencedict.com) ions and usually negatively charged dusty micro - particles.

99 The means of improve the Q-factor of micro -cavity are significant for designing photonic-crystal micro-cavity and other photonic components.

100 Generally the onset is related to trauma even micro trauma of shoulder or caused by the overwork excess fatigue overstrain affection of external wind-cold.

101 In order to increase the utilization ratio of discharge energy in Micro-EDM(micro electric discharge machining),[sentencedict.com] the control system needs continuous data of discharge parameters in a slot.

102 This paper presents a micro air vehicle for the use of autopilot system hardware and software system design.

103 The blast furnace raceway formation under the intensive coal injection by measurement of micro wave reflection gunned through a tuyere is discussed.

104 As long as trace is not overrate their own strength, micro olfactory love grass still, old red did not spare her ran a divergent Fang, fragrance.

105 Recent years have seen the overheated micro economy, toughly regulating process and the reasons are multi - level.

106 Polarization makes the micro - crystal growth from twist to untwist , thus the characteristic loop pattern disappears gradually.

107 This paper presented a new digital valveless micro - pump based on the digital micro fluidic technology.

108 In this paper, a theoretical model is used to analyze shrinkage behavior, which is based on micro pore structure model and capillary tension theory.

109 Objective To observe the immune separation effects of micro capsules from alginate polylysine alginate(APA)in the rat cerebral transplantation of bovine chromaffin cell(BCC) grafts.

110 The relationship between input angle and output differential capacitance is presented for the realization of the capacitance signal detection of micro electromagnetic disk levitating gyroscope.

111 Meanwhile, the rapid development of new media, such as blogs, micro blogs and BBS (bulletin board system), is providing a new channel for citizens to stand up for their rights.

112 Compose the material universe, the concept of micro - macro is the world's mysteries.

113 Finally, the initial design of a micro PET scanner employing the new detector is introduced.

114 When the frequency of driving signal applied to the vibration model with liquid friction is in a certain scope the micro robot can vibrate in spite of liquid friction.

115 We designed a new kind of parallel beam splitting polarizer which can give a adjustable micro - beam - displacement.

116 Section yellowish-white have concentric rings grain or white channels point, chewing the micro aculeate throat feeling.

117 Macro and micro structure of the fractured steering knuckle arm was examined by optical microscope and scanning electron microscope.

118 Micro electrical discharge machining (MWEDM), a nontraditional micro gear die fabrication method, is presented in this paper.

119 Based on this fact, the research and design of micro align lens which is fabricated by means of multimode fiber fabrication techniques is carried out.

120 It is an ideal machine for micro motor production line ( or single equipment ).